No abstract

No abstract

No abstract

To deepen the oxidation depth and promote the exothermic reaction of aluminum nanoparticles (Al NPs), this work constructed perfluoropolyether-functionalized Al NPs by using a facile fabrication method. It was determined that perfluoropolyether (PFPE) was uniformly distributed on the surface of the Al NPs with no obvious agglomeration by micro-structure analysis. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), microcomputer automatic calorimeter (MAC), and combustion and ignition experiments were performed for varying percentages of PFPE blended with Al NPs to examine the reaction kinetics and combustion performance. It was revealed that the oxidation mechanism of PFPE-functionalized Al NPs at a slow heating rate was regulated by the reaction interface fuel–oxidizer ratio. Due to the enlarged fuel–oxidizer contact surface area, fluorine atoms could adequately decompose the inert alumina shell surrounding the Al NPs, optimizing the combustion process of Al NPs. The analytical X-ray diffraction (XRD) pattern results confirmed the existence of aluminum trifluoride in combustion products, providing insights into the oxidation mechanism of Al NPs. The obtained results indicated that PFPE participated in the oxidation of Al NPs and improved the overall reactivity of Al NPs.

Determination of macroscale detonation parameters of energetic materials (EMs) in a safe and rapid way is highly desirable. However, traditional experimental methods suffer from tedious operation, safety hazards and high cost. Herein, we present a micro-scale approach for high-precision diagnosis of explosion parameters based on radiation spectra and dynamic analysis during the interaction between laser and EMs. The intrinsic natures of micro-explosion dynamics covering nanosecond to millisecond and chemical reactions in laser-induced plasma are revealed, which reveal a tight correlation between micro-detonation and macroscopic detonation based on laser-induced plasma spectra and dynamics combined with statistic ways. As hundreds to thousands of laser pulses ablate on seven typical tetrazole-based high-nitrogen compounds and ten single-compound explosives, macroscale detonation performance can be well estimated with a high-speed and high-accuracy way. Thereby, the detonation pressure and enthalpies of formation can be quantitatively determined by the laser ablation processes for the first time to our knowledge. These results enable us to diagnose the performance of EMs in macroscale domain from microscale domain with small-dose, low-cost and multiple parameters.