No abstract

Land surface characteristics, including soil type, terrain slope, and antecedent soil moisture, have significant impacts on surface runoff during heavy precipitation in highly urbanized areas. In this study, a Linear Spectral Mixture Analysis (LSMA) method is modified to extract high-precision impervious surface, vegetation, and soil fractions. In the modified LSMA method, the representative endmembers are first selected by combining a high-resolution image from Google Earth; the unmixing results of the LSMA are then post-processed to reduce errors of misclassification with Normalized Difference Built-up Index (NDBI) and Normalized Difference Vegetation Index (NDVI). The modified LSMA is applied to the Landsat 8 Operational Land Imager (OLI) image from 18 October 2015 of the main urban area of Guangzhou city. The experimental result indicates that the modified LSMA shows improved extraction performance compared with the conventional LSMA, as it can significantly reduce the bias and root-mean-square error (RMSE). The improved impervious surface, vegetation, and soil fractions are used to calculate the composite curve number (CN) for each pixel according to the Soil Conservation Service curve number (SCS-CN) model. The composite CN is then adjusted with regional data of the terrain slope and total 5-day antecedent precipitation. Finally, the surface runoff is simulated with the SCS-CN model by combining the adjusted CN and real precipitation data at 1 p.m., 4 May 2015.

Surface water extraction from remote sensing imagery has been a very active research topic in recent years, as this problem is essential for monitoring the environment, ecosystems, climate, and so on. In order to extract surface water accurately, we developed a new subpixel surface water extraction (SSWE) method, which includes three steps. Firstly, a new all bands water index (ABWI) was developed for pure water pixel extraction. Secondly, the mixed water-land pixels were extracted by a morphological dilation operation. Thirdly, the water fractions within the mixed water-land pixels were estimated by local multiple endmember spectral mixture analysis (MESMA). The proposed ABWI and SSWE have been evaluated by using three data sets collected by the Landsat 8 Operational Land Imager (OLI). Results show that the accuracy of ABWI is higher than that of the normalized difference water index (NDWI). According to the obtained surface water maps, the proposed SSWE shows better performance than the automated subpixel water mapping method (ASWM). Specifically, the root-mean-square error (RMSE) obtained by our SSWE for the data sets considered in experiments is 0.117, which is better than that obtained by ASWM (0.143). In conclusion, the SSWE can be used to extract surface water with high accuracy, especially in areas with optically complex aquatic environments.Keywords: subpixel surface water extraction; all bands water index; Landsat 8 OLI; mixed water-land pixels; multiple endmember spectral mixture analysis Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) [13], Advanced Very High Resolution Radiometer (AVHRR) [14], Landsat [15,16], HJ-1A/B [17], ZY-3 [18], and others. Among these sensors, those with high temporal resolution are generally limited in terms of spatial resolution, while those with high spatial resolution are mostly limited in terms of revisit time and cost [16]. Due to its good tradeoff in terms of spatial and temporal resolution, cost-free access, and continuity over 40 years, Landsat has become one of the most widely used optical sensors for surface water research. Particularly, significant improvements in signal-to-noise ratio and radiometric resolution make the Landsat-8 Operational Land Imager (OLI) a very promising instrument for enhanced extraction and monitoring of optically complex surface water [19].Commonly adopted surface water extraction methods based on optical images include digitizing through visual interpretation, single-band thresholding [15,20,21], multiple-band spectral water indices [10,18,[22][23][24], image processing methods [25,26], and target detection methods, such as constrained energy minimization (CEM) [27]. Each of these methods exhibits advantages and limitations. Combinations of the above methods have been also proposed to improve water extraction performance [16,[27][28][29][30][31][32][33]. Among these water extraction methods, multiple-band spectral water indices are the most popular ones due to their simplicity, cost-effectiveness, and reproducibilit...

This study explored the model of urban impervious surface (IS) density, land surface temperature (LST), and comprehensive ecological evaluation index (CEEI) from urban centers to suburbs. The interrelationships between these parameters in Guangzhou from 1987 to 2019 were analyzed using time-series Landsat-5 TM (Thematic Mapper), Landsat-8 OLI (Operational Land Imager), and TIRS (Thermal Infrared Sensor) images. The urban IS densities were calculated in concentric rings using time-series IS fractions, which were used to construct an inverse S-shaped urban IS density function to depict changes in urban form and the spatio-temporal dynamics of urban expansion from the urban center to the suburbs. The results indicated that Guangzhou experienced expansive urban growth, with the patterns of urban spatial structure changing from a single-center to a multi-center structure over the past 32 years. Next, the normalized LST and CEEI in each concentric ring were calculated, and their variation trends from the urban center to the suburbs were modeled using linear and nonlinear functions, respectively. The results showed that the normalized LST had a gradual decreasing trend from the urban center to the suburbs, while the CEEI showed a significant increasing trend. During the 32-year rapid urban development, the normalized LST difference between the urban center and suburbs increased gradually with time, and the CEEI significantly decreased. This indicated that rapid urbanization significantly expanded the impervious surface areas in Guangzhou, leading to an increase in the LST difference between urban centers and suburbs and a deterioration in ecological quality. Finally, the potential interrelationships among urban IS density, normalized LST, and CEEI were also explored using different models. This study revealed that rapid urbanization has produced geographical convergence between several ISs, which may increase the risk of the urban heat island effect and degradation of ecological quality.