The phase equilibria of the Sn-Ag-In system were investigated by means of differential scanning calorimetry (DSC) and metallography. The isothermal sections at 180-600°C, as well as some vertical sections, were determined. Thermodynamic assessment of this system was also carried out based on the experimental data of thermodynamic properties and phase equilibria using the calculation of phase diagram (CALPHAD) method, in which the Gibbs energies of the liquid, fcc, and hcp phases are described by the subregular solution model, and those of compounds are represented by the sublattice model. The thermodynamic parameters for describing the phase equilibria were optimized, and reasonable agreement between the calculated and experimental results was obtained. The maximum bubble-pressure method and dilatometric method have been used in measurements of the surface tension and density of the binary In-Sn and ternary (Sn-3.8Ag) eut ϩ In (5 at.% and 10 at.% ) liquid alloys, respectively. The experiments were performed in the temperature range from 160-930°C. The experimental data of the surface tension were compared with those obtained by the thermodynamic calculation of Butler's model.

No abstract

The phase equilibria of Sn-In-X (X = Ag, Bi, Sb, Zn), the most basic information necessary for the development of Pb-free micro-soldering alloys, were studied using the CALPHAD method. Thermodynamic analyses for describing the Gibbs energies of the constituent phases were made by optimizing the obtained data on the experimental phase diagrams, and such data in the literature, including data on thermochemical properties. The present results combined with the thermodynamic database which was recently developed by our group [I. Ohnuma et al., J. Electron. Mater. 28, 1164] provide various information on phase equilibria such as liquidus and solidus surfaces, isothermal and vertical section diagrams, mole fractions of the phase constitutions, etc., and thermodynamic properties such as activity, heat of mixing, surface energy, viscosity, etc., in multi-component soldering alloy systems including the elements of Pb, Bi, Sn, Sb, Cu, Ag, Zn, and In. Typical examples for the phase diagrams and thermodynamic properties of Sn-In-X ternary systems are shown. The application of the database to the alloy design for Pb-free solders is also presented.