No abstract

Hydroxyapatite powders were made by reacting orthophosphoric acid with calcium hydroxide and dense bioactive coatings were subsequently produced by the plasma spray technique. Three types of hydroxyapatite (flame spheroidized) monolayer coatings and three types of functionally graded coatings were manufactured. It was found that average microhardness values of monolayer coatings decreased as the indentation load increased. The relationship between indentation load and indent diagonal length observed Meyer's law. Microhardness and fracture toughness of coatings were affected by characteristics of feedstock powders for plasma spraying. The indentation fracture toughness of coatings could be significantly increased by incorporating a toughening phase.

No abstract

A novel vacuum brazing technique, termed glow discharge plasma brazing, is investigated. During the brazing process, the heating temperature of base metals is proportional to the square of the operating barometric pressure and the operating voltage, and the temperature distribution of the base metals is easily regulated by means of suitable measures. The ion beam from the glow discharge anode can efficiently sputterclean the surface of the base metals and the filler metal, which improves the wetting and spreading properties of the filler metal. Unlike the traditional vacuum brazing process, a high quality braze of Fe-Ni alloy is achieved at lower vacuum (a pressure of 5-30 Pa or higher) by using the glow discharge brazing method. The brazing technique has a promising application in industry.STWJ/439