Osteonecrosis of the femoral head (ONFH) is a debilitating disease that results in progressive collapse of the femoral head and subsequent degenerative arthritis. Few treatments provide both sufficient mechanical support and biological cues for regeneration of bone and vascularity when the femoral head is still round and therefore salvageable. We designed and 3D printed a functionally graded scaffold (FGS) made of polycaprolactone (PCL) and β-tricalcium phosphate (β-TCP) with spatially controlled porosity, degradation, and mechanical strength properties to reconstruct necrotic bone tissue in the femoral head. The FGS was designed to have low porosity segments (15% in proximal and distal segments) and a high porosity segment (60% in middle segment) according to the desired mechanical and osteoconductive properties at each specific site after implantation into the femoral head. The FGS was inserted into a bone tunnel drilled in rabbit femoral neck and head, and at 8 weeks after implantation, the tissue formation as well as scaffold degradation was analyzed. Micro-CT analysis demonstrated that the FGS-filled group had a significantly higher bone ingrowth ratio compared to the empty-tunnel group, and the difference was higher at the distal low porosity segments. The in vivo degradation rate of the scaffold was higher in the proximal and distal segments than in the middle segment. Histological analysis of both non-decalcified and calcified samples clearly indicated new bone ingrowth and bone marrow-containing bone formation across the FGS. A 3D printed PCL-β-TCP FGS appears to be a promising customized resorbable load-bearing implant for treatment of early stage ONFH. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1002-1011, 2018.

No abstract

Peri-prosthetic infection and loosening of implants are major problems in orthopaedic and dental surgery. To address these issues, surface treatment methods for titanium implants have been improved by modifying the alkali and heat treatment. We have previously fabricated calcium-treated Ti metal that releases Sr ions (CaSr-Ti), which resulted in a higher in vitro osteogenic response and early in vivo bone bonding. Further, we developed a Ti metal that released both Sr and Ag ions (CaSrAg-Ti). In this study, we evaluated the antibacterial ability and osteogenic cellular response of CaSrAg-Ti and CaSr-Ti in vitro using rat bone marrow stromal cells (BMSCs) cultured on implant samples and extract mediums (EMs) made by immersing the implant samples in the medium. CaSrAg-Ti did not show cytotoxicity and was associated with a slightly higher osteogenic response when compared to CaSr-Ti, without inhibiting the effect of Sr. The osteogenic response was also observed in the cells cultured with the CaSrAg-Ti EM; however, the response was not as high as that of the cells on the CaSrAg-Ti implant sample. Significantly higher antibacterial activity was observed along with an antibacterial efficacy of more than 95% against methicillin-susceptible Staphylococcus aureus and Escherichia coli. The main advantages of our surface treatment are its simplicity and low cost. Therefore, our treatment is promising for clinical applications in orthopaedic or dental Ti-based implants with antibacterial and early bone-bonding abilities.

Implantation into osteoporotic bone constitutes a challenging problem because of early migration or loosening of the implant, which is primarily due to insufficient initial fixation in porotic bone. Therefore, it is desirable to provide implants with a capacity for early bone bonding. We have achieved conferring early bone bonding ability to titanium metal by releasing strontium ions or magnesium ions. Our treatment is promising for clinical applications to achieve early bone bonding of orthopedic or dental Ti-based implants.

To overcome problems associated with loosening of orthopedic implants and surgical site infections, we developed a novel, titanium (Ti)-based material that releases both strontium and silver ions (CaSrAg-Ti) based on alkali-and-heat treatment. The results of commercially pure Ti (cp-Ti), Ti that releases Sr ions only (CaSr-Ti), and the novel CaSrAg-Ti material were compared. Mechanical tests were performed to evaluate the in vivo bonding properties of CaSrAg-Ti and the bone-implant contact (BIC) ratio in histological specimens was determined at 4 and 8 weeks after implantation in a rat femur. Also, the in vitro antibacterial activities of this material against methicillinsusceptible Staphylococcus aureus (MSSA) were evaluated after a 24 h incubation period by assaying colony-forming units. In addition, antibacterial activities were evaluated in vivo at 7 days after implantation in a rat subcutaneous pocket model. There was direct contact between the bone and CaSrAg-Ti in histological specimens and no apparent signs of argyrosis in any rat. The bone-bonding strength and the BIC ratio were increased by 2.7-and 2.3-fold for CaSrAg-Ti vs. cp-Ti at 4 weeks and 2.2and 2.0-fold at 8 weeks, respectively. As compared with cp-Ti, the number of viable MSSA remaining on CaSrAg-Ti was reduced by 100 ± 0% in vitro and 94.2 ± 6.9% in vivo. Ti that releases Sr and Ag ions is a promising material that exhibits both bone-bonding properties and anti-MSSA activities.