Nowadays, with the rapid development of the traffic infrastructure construction and the growing of the traffic flowing and speed, the vehicle-bridge coupling vibration research has become the focus of the bridge engineering study. The dynamic response of the bridge under the traffic flowing is one of the vital parameters for the vehicle-bridge coupling vibration analysis. In this paper, a methodology, employing the speed radar gun, the video recorder, and the dynamic strain tester in combination with manually recording is used to continuously and detailed investigate the traffic loads on the expressway bridge within 24 hours a day. With this approach introduced by this paper, all the critical parameters, such as the vehicle type, speed, traffic lane, the arriving time of the traffic and the bridge-vehicle dynamic interaction are all recorded. In this investigation, firstly the dynamic responses of 8 pieces of girders of the bridge under 5650 individual vehicles driving through the bridge are recorded, then in conjunction with the investigated traffic flowing samples, in terms of the vehicle type, some detailed statistics study is conducted on the collected records, and finally the space-time distribution laws of the dynamic response of the bridge under the traffic flowing are studied extensively. The result of this study could provide helpful theoretic guidance and supporting data for the vehicle-bridge coupling vibration research.

According to the behavior of seismically isolated continuous bridges, the bidirectional nonlinear characteristics of lead rubber bearing are taken into account by using two orthogonal nonlinear level spring elements. Based on the FEA software, the analysis models of seismically isolated and non-isolated continuous bridges are established. And the nonlinear seismic response for these analysis models is carried out under the function of the reasonably chosen seismic motion. The analytic results indicate that the natual period of seismically isolated bridge can be prolonged to avoid the principal period of ground and the seismic energy of structure can be efficiently consumed by the hysteretic energy dissipation of lead rubber bearing. So the response of bridge structure can be reduced to make sure most of the component work in the elastic phase and the structure can be well protected.