Exploration of high‐efficiency, economical, and ultrastable electrocatalysts for the oxygen reduction reaction (ORR) to substitute precious Pt is of great significance in electrochemical energy conversion devices. Single‐atom catalysts (SACs) have sparked tremendous interest for their maximum atom‐utilization efficiency and fascinating properties. Therefore, the development of effective synthetic methodology toward SACs becomes highly imperative yet still remains greatly challenging. Herein, a reliable SiO2‐templated strategy is elaborately designed to synthesize atomically dispersed Fe atoms anchored on N‐doped carbon nanospheres (denoted as Fe–N–C HNSs) using the cheap and sustainable biomaterial of histidine (His) as the N and C precursor. By virtue of the numerous atomically dispersed Fe–N4 moieties and unique spherical hollow architecture, the as‐fabricated Fe–N–C HNSs exhibit excellent ORR performance in alkaline medium with outstanding activity, high long‐term stability, and superior tolerance to methanol crossover, exceeding the commercial Pt/C catalyst and most previously reported non‐precious‐metal catalysts. This present synthetic strategy will provide new inspiration to the fabrication of various high‐efficiency single‐atom catalysts for diverse applications.
The development of Pt-based electrocatalysts with high Pt utilization efficiency towardt he hydrogen evolution reaction(HER) is of great significance for the future sustainableh ydrogen economy.F or rational design of high-performanceH ER electrocatalyst, the simultaneous consideration of both thermodynamic and kinetic aspects remains greatlyc hallenging. Herein, as imple template-derived strategyi sd emonstrated for the in situ growth of ultrafine Pt nanoparticleso nto Co 3 O 4 nanosheet-assembled microflowers (abbreviated as Pt/Co 3 O 4 microflowers hereafter) by using the prefabricated PtCo-based Hofmann coordination polymer as reactive templates.T he elaborate preparation of such intriguing hierarchical architecture with well-dispersed tiny Pt nanoparticles,a bundant metal/ oxide heterointerfaces and open configuratione ndows the formed Pt/Co 3 O 4 microflowers with high Pt utilization efficiency,r ich active sites, lowerede nergy barrier for water dissociation and expedited reaction kinetics. Consequently,t he Pt/Co 3 O 4 microflowers exhibit superior HER activity with ar elatively low overpotential of 34 mV to deliver ac urrent density of 10 mA cm À2 ,s mall Tafel slope (34 mV dec À1)a nd outstanding electrochemical stability, representing an attractive electrocatalyst for practical water splitting. What's more, our concept of in situ construction of metal/oxide heterointerfaces may provide a new opportunity to design high-performance electrocatalysts for av ariety of applications.
Background:
Sample preparation is one of the most challenging phases in pharmaceutical analysis, especially in biological matrices, affecting the whole analytical methodology.
Objective:
In this study, a new Ca(II)/Cu(II)/alginate/CuO nanoparticles hydrogel fiber (CCACHF) was synthesized through a simple, green procedure and applied for fiber micro solid phase extraction (FMSPE) of diazepam (DIZ) and oxazepam (OXZ) as model drugs prior to high-performance liquid chromatography-UV detection (HPLC-UV).
Methods:
Composition and morphology of the prepared fiber were characterized and the effect of main parameters on the fiber fabrication and extraction efficiency have been studied and optimized.
Results:
In optimal conditions, calibration curves were linear ranging between 0.1–500 µg L−1 with regression coefficients of 0.9938 and 0.9968. Limit of detection (LOD) (S/N=3) and limit of quantification (LOQ) (S/N=10) of the technique for DIZ and OXZ were 0.03 to 0.1 µg L−1. Within-day and between-day relative standard deviations (RSDs) for DIZ and OXZ were 6.0–12.5% and 3.3–9.4%, respectively.
Conclusion:
The fabricated adsorbent has been substantially employed to extraction of selected benzo-diazepines (BZDs) from human serum real specimens and the obtained recoveries were also satisfactory (82.1-109.7%).
Purpose
This study aims to investigate the effect of changes in iron content in 70/30 copper–nickel alloy on the corrosion process.
Design/methodology/approach
70Copper–30Nickel-xFe-1Mn (x = 0.4,0.6,0.8,1.0 Wt.%) alloy were prepared by the high frequency induction melting furnace. The scanning electron microscope, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy were used to analyze the morphology and component of the corrosion product film.
Findings
The results show that the corrosion resistance of 70/30 copper–nickel alloy added with 1.0%Fe is the best, and the film is divided into inner dense Cu2O composite film and outer hydration loose layer; XRD showed that after adding 1.0% Fe, the content of Cu2(OH)3Cl in the corrosion product film was significantly reduced, while the content of Cu2O remained unchanged; XPS showed that nickel accumulates in the inner layer of corrosion product film; the stage growth mode of the film, the role of nickel in it and the enrichment mechanism of iron in the inner film were summarized and discussed.
Originality/value
The changes in the composition and structure of the corrosion product film caused by the iron content are revealed, and the mechanism of the difference in corrosion resistance is discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.