The mechanical strength of double network (DN) gels consisting of highly cross-linked poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) as the first component and linear polyacrylamide (PAAm) as the second component has been investigated by varying the molecular weight of the second polymer PAAm, M(w). The experimental results reveal that, for toughening of the DN gels, (1) M(w) is one of the dominant parameters; (2) there is a critical value of M(w) = 10(6) for a remarkable enhancement; (3) the fracture energy of DN gels with a M(w) larger than 10(6) reaches a value as high as 10(3) J/m(2). By plotting the strength of DN gels (fracture stress sigma and fracture energy G) against a characteristic parameter of c[eta], where c is the average concentration of PAAm in the DN gels and [eta] is the intrinsic viscosity of PAAm, it is found that the dramatic increase in the mechanical strength of the DN gels occurs above the region where linear PAAm chains are entangled with each other. Thus, we conclude that the entanglement between the second component PAAm plays an important role of the toughening mechanism of DN gels. This result supports the heterogeneous model, which predicts the presence of "voids" of the first network PAMPS with a size much larger than the radius of the second polymer PAAm.

The mechanical response to electrical stimulation was investigated in a chiral smectic elastomer. The twodimensional strain tensor in an elastomer film was precisely measured by tracking fluorescent beads dispersed on the film. Shear deformation in the film was clearly observed when an electric field was applied perpendicular to the film surface. The temperature dependence of the strain tensor was also investigated, and the origin of the electric-field-induced shear strain in the chiral smectic-C phase was mainly attributed to the Nambu-Goldstone mode.

We have measured the response of shear stress to ac electric fields under steady shear flow in the dropletdispersed phase of an immiscible polymer blend. A characteristic mode was found under steady shear flow, the relaxation frequency of which increased with increasing the shear rate. In the frequency dispersion, a scaling relation derived from dimensional analysis was confirmed to hold. The origin of the mode was investigated on the basis of the Maffettone-Minale ͑MM͒ model, in which the droplet shape is described by a second-rank tensor. The frequency dispersion of the response was also calculated using a modified MM model.

Polyampholyte (PA) hydrogels have great potential for biomedical applications, owing to their high toughness and good self-recovery and self-healing (SELF) behavior in addition to their physical properties similar to human tissue. However, their implementation as practical biomedical skin patches or wearable devices has so far been limited by their insufficient transdermal adhesion strength. In this work, a new polyampholytic terpolymer (PAT) hydrogel with enhanced skin adhesion was developed using a novel and simple strategy that tunes the structure of ion-pair associations (IPAs), acting as cross-links, in the hydrogel via adding an extra neutral monomer component into the network without changing the total charge balance. The PAT hydrogels were synthesized by the terpolymerization of the neutral monomer N,N-dimethylacrylamide (DMAAm) (or 2-hydroxyethyl methacrylate (HEMA)) as well as the cationic monomer 3-(methacryloylamino) propyl-trimethylammonium chloride (MPTC) and the anionic monomer sodium p-styrenesulfonate (NaSS). Their IPA, which determines their network structure, was modulated by varying the feed concentration of the neutral monomer, C nm . An increase of C nm within an optimized C nm window (0.3−0.4 M) decreased the cross-linking density (strength and density of the IPAs) of the PAT hydrogels, reducing the softening temperature and Young's modulus, which increased compliance but maintained sufficient mechanical strength and thereby maximized the contact surface and enhanced skin adhesion. The DMAAm monomers, compared to the HEMA monomers, produced the higher skin adhesion of the PAT hydrogel, which was explained by the difference in their reactivity to the MPTC and NaSS. This study demonstrated this new method to develop the PAT hydrogels with excellent skin adhesion and biocompatibility while maintaining good toughness, compliance, and SELF behavior and the potential of the PAT hydrogels for biomedical skin patches and wearable devices.

We have investigated the structural change of an immiscible blend consisting of two polymers with equal viscosity subjected to a step electric field under shear flow. During the process, three-dimensional images were successfully acquired with a confocal scanning laser microscope, and at the same time, the transient shear stress was also measured. From the images, the interface tensor was calculated. In a blend of polymers with equal viscosity, the total shear stress may consist of the viscous, interfacial, and electric stresses. An experiment was performed to separate these stresses, and the results are discussed in terms of the interface tensor.