The comprehensive description of complex mixtures such as bio-oils is required to understand and improve the different processes involved during biological, environmental or industrial operation. In this context, we have to consider how different ionization sources can improve a non-targeted approach. Thus, the Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) has been coupled to electrospray ionization (ESI), laser desorption ionization (LDI) and atmospheric pressure photoionization (APPI) to characterize an oak pyrolysis bio-oil. Close to 90% of the all 4500 compound formulae has been attributed to CHO with similar oxygen class compound distribution. Nevertheless, their relative abundance in respect with their double bound equivalent (DBE) value has evidenced significant differences depending on the ion source used. ESI has allowed compounds with low DBE but more oxygen atoms to be ionized. APPI has demonstrated the efficient ionization of less polar compounds (high DBE values and less oxygen atoms). The LDI behavior of bio-oils has been considered intermediate in terms of DBE and oxygen amounts but it has also been demonstrated that a significant part of the features are specifically detected by this ionization method. Thus, the complementarity of three different ionization sources has been successfully demonstrated for the exhaustive characterization by petroleomic approach of a complex mixture.

Pyrolysis or liquefaction processes can be applied to lignocellulosic biomass to produce a bio-oil which allows the access of green chemicals or sustainable energy. Among the different existing resources, this raw material has the advantage to come from nonfood feedstocks such as agricultural wastes (wood, grass, ...) or dedicated plantations. Whatever the considered bio-oil, the development of high performance analytical techniques is needed to achieve an exhaustive characterization. The use of Fourier transform ion cyclotron resonance mass spectrometry coupled to electrospray ionization (ESI-FT-ICR-MS) has the potential to chemically identify the components of bio-oil at the level of the molecular formula. In this work, we investigated the influence of the sample preparation (use and nature of dopant and ion detection mode) on the development of a robust methodology for lignocellulosic based bio-oil characterization. Commonly used ESI dopants have been studied to increase the ionization yield and the measurement repeatability. We highlighted the dramatic effect of the sample preparation on the global chemical description of the bio-oil, especially the disproportional contribution of the C x H y N 1−5 O z species. Moreover, we demonstrated the ability of well-controlled ESI ionization conditions to attain, on the one hand, specific chemical information on the origin (cellulose, hemicellulose, or lignin) of the bio-oil constituents and, on the other hand, the simultaneous description of both its oily and aqueous compounds without a fractionation step.

The understanding of lignin softening and pyrolysis is important for developing lignocellulosic biorefinery in order to produce carbon fibers, polymers additives, green aromatics, or biofuels. Protobind lignin (produced by soda pulping of a wheat straw) was characterized by thermogravimetry, calorimetry (for glass transition temperature and heat of pyrolysis reactions), in situ 1H NMR (for the analysis of the mobility of protons upon lignin thermal conversion), and solution-state 13C and 31P NMR (determination of functional groups in lignin). In situ rheology reveals the real-time viscoelastic behavior of lignin as a function of temperature. Upon heating, lignin undergoes softening, through glass transition overlapped with depolymerization, and is followed by the solidification of the softened material by cross-linking reactions. The lignin residues were quenched within the rheometer at the midpoint temperatures of softening and solidification regions and were further analyzed by elemental analysis, GPC-UV of acetylated THF soluble fractions, FTIR, solid 13C NMR, and laser desorption ionization (LDI) combined with very high-resolution mass spectrometry (HRMS). We present the first report on lignin biochars analysis by LDI-HRMS. NMR and FTIR analyses provide the evolution of functional moieties in lignin residues. 13C NMR, GPC-UV, and LDI FTICRMS analyses depict the depolymerization mechanism combined with cross-linking and demethoxylation reactions. An overall physical and chemical mechanism for the thermal conversion of alkali lignin is proposed based on these complementary analyses.