No abstract

Purpose Numerically analyzed the flow characteristic and explored the hydrodynamic mechanism of the pump mode hump district formation of a Francis pump-turbine. Design/methodology/approach Numerical simulations were conducted of the entire pump-turbine flow passage under different discharge conditions by adopting the SST-CC turbulence model. The internal flow at hump district has been explained in detail combined with the model test in this paper. The unsteady flow and pressure fluctuation characteristics are analysed under five different discharge conditions in the hump and nearby region. The reason of the hump district formation is explored combined with the flow components hydraulic loss. Findings The large hydraulic loss, high relative peak-to-peak amplitudes and low dominant frequencies are on account of the disorganized internal flow condition. The formation of the hump district is concerned with the large hydraulic loss inside the draft tube, runner and guide vanes as there occurs secondary flow, backflow even vortex in the hump district. In addition, the low dominant frequencies at recording points inside the flow passage are always accompanied with the change of flow patterns and the spreading of the pressure fluctuations. Originality/value The analysis method of each flow components hydraulic loss combined with internal flow structure is adopted to explore the mechanism of pump mode hump characteristic. The flow characteristic and pressure pulse characteristics all correspond to the flow components hydraulic loss.

2016),"Analysis of the internal flow behavior on S-shaped region of a Francis pump turbine on turbine mode", Engineering Computations, Vol. 33 Iss 2 pp. 543 -561 Permanent link to this document: http://dx.(2016),"A new strain-based finite element for plane elasticity problems", Engineering Computations, Vol. 33 Iss 2 pp. 562-579 http://dx.(2016),"A computational and experimental study for the optimum reinforcement layout design of an RC frame", Engineering Computations, Vol. 33 Iss 2 pp. 507-527 http://dx.If you would like to write for this, or any other Emerald publication, then please use our Emerald for Authors service information about how to choose which publication to write for and submission guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information. About Emerald www.emeraldinsight.comEmerald is a global publisher linking research and practice to the benefit of society. The company manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as well as providing an extensive range of online products and additional customer resources and services. AbstractPurpose -The purpose of this paper is to numerically analyze the flow characteristic and to explore the hydrodynamic mechanism of the S-shaped region formation of a Francis pump-turbine. Design/methodology/approach -Three-dimensional steady and unsteady simulations were performed for a number of operating conditions at the optimal guide vanes opening. The steady Reynolds averaged Navier-Stokes equations with the SST turbulence model were solved to model the internal flow within the entire flow passage. The predicted discharge-speed curve agrees well with the model test at generating mode. This paper compared the hydrodynamic characteristics of for off-design cases in S-shaped region with the optimal operating case, and more analysis focusses particularly on very low positive and negative discharge cases with the same unit speed. Findings -At runaway case toward smaller discharge, the relative circumferential velocity becomes stronger in the vaneless, which generates the "water ring" and blocks the flow between guide vane and runner. The runner inlet attack angle becomes larger, and the runner blade passages nearly filled with flow separation and vortexes. The deterioration of runner blade flow leads to the dramatic decrease of runner torque, which tends to reduce the runner rotation speed. In this situation, the internal flow cannot maintain the larger rotating speed at very low positive discharge cases, so the unit discharge-speed curves bend to S-shaped near runaway case. Originality/value -The analysis method of four off-design cases on S-shaped region with the comparison of optimal operation case and the calculated attack angles are adopted to explore the mechanism of S characteristic. The flow characteristic and quantitative analysis all explain the bending of the unit discharge-speed curves.

No abstract

No abstract