No abstract

No abstract

Filling and nucleation are the mechanisms of modifying cement paste with nanomaterials, as investigated by previous studies, and are difficult to reflect the different effects of nanomaterials, especially on the changes of cement clinker and hydration products in the cement hydration process. In this study, the mechanisms of modifying cement paste with nano-calcium carbonate (NC), nano-graphene oxide (NG), nano-silica (NS), and nano-titanium dioxide (NT) were investigated by determining the mechanical properties of cement paste treated with nanomaterials and analysing the changes in the cement clinker (tricalcium silicate and dicalcium silicate), hydration products (portlandite and ettringite), and microstructure through many micro-test methods. The results indicate that the incorporation of nanomaterials could improve the early strength of cement paste specimens due to more consumption of cement clinker. Meanwhile, different nanomaterials promote the formation of different hydration products at early ages. C–A–S–H gel, flower-like ettringite, and C–S–H seeds are widely distributed in the cement paste with the incorporation of NC, NG, and NS, respectively. NT exhibits insignificant nucleation effect and has inhibitory effect on portlandite precipitation. This study provides key insights into the mechanism of nanomaterials from the perspective of cement hydration, which may promote the further research and application of nanomaterials in the cement and concrete industries.

Nano-materials modified cement-based materials have attracted wide attention due to their advantages of improving strength and durability. In this paper, the effect of nano-SiO2 (NS) with particle sizes of 15 and 50 nm on the mechanical properties and microstructure of cement paste was studied. The results showed that 50 nm NS provided a greater compressive strength than that of 15 nm NS, while 15 nm NS afforded a denser microstructure than that of 50 nm NS. A fluctuation in the compressive strength was revealed using a physicochemical reaction equation, and the microstructure was interpreted by a pore structure analysis. In addition, the orientation index of calcium hydroxide (CH) with 15 nm NS could be reduced significantly in the early stages (the early stages refer to the first three days from the maintaining of specimens) compared with when the 50 nm NS was used. The experimental results also showed that NS helped increase the mechanical strength of cement paste, advance the endothermic peak of CH, and refine the size of the CH crystals. The microstructural changes at different stages of cement paste with different particle sizes of NS were investigated by X-ray diffraction, scanning electron microscopy, mercury intrusion porosimetry and differential thermal analysis. This study is expected to promote the research and application of nano-materials in the cement industry by clarifying the performance of NS with different particle sizes.

No abstract