Nanosheet Ca2Nb3O20 (ns-CN) layers with pseudo-perovskite-type crystal configuration were applied on the surface of polycrystalline metal substrates to achieve preferential crystal orientation of Pb(Zr,Ti)O3 (PZT) films for the purpose of enhanced ferroelectricity comparable to that of epitaxial thin films. PZT films with tetragonal symmetry (Zr/Ti=0.40:0.60) were fabricated by chemical solution deposition (CSD) on ns-CN-buffered Inconel 625 and SUS 316L substrates, while ns-CN was applied on the the substrates by dip-coating. The preferential crystal growth on the ns-CN layer can be achieved by favorable lattice matching between (001)/(100)PZT and (001)ns-CN planes. The degree of (001) orientation was increased for PZT films on ns-CN/Inconel 625 and ns-CN/SUS 316L substrates, whereas randomly-oriented PZT films with a lower degree of (001) orientation were grown on bare and Inconel 625 films. Enhanced remanent polarization of 60 µC/cm2 was confirmed for the PZT films on ns-CN/metal substrates, ascribed to the preferential alignment of the polar [001] axis normal to the substrate surface, although it also suffered from higher coercive field above 500 kV/cm caused by PZT/metal interfacial reaction.

Ultrahigh strain and piezoelectric behavior in relaxor based ferroelectric single crystals Journal of Applied Physics 82, 1804 (1997) Lead zirconate titanate (PZT) film with polar axis orientation was grown on a SUS 316L stainless steel substrate with the help of a Ca 2 Nb 3 O 10 nanosheet (ns-CN) layer that had a pseudo-perovskite-type crystal structure. The ns-CN buffer layer was supported on a platinized SUS 316L (Pt/SUS) substrate, followed by chemical solution deposition (CSD) of the PZT films with tetragonal symmetry (Zr/Ti =40/60). The PZT films consisting of c-domain, with [001]-axis orientation of the perovskite unit cell, were deposited on the ns-CN/Pt/SUS substrate owing to (i) epitaxial lattice matching between the unit cell of PZT and substrate surface and (ii) in-plane thermal stress applied to the PZT film during cooling-down step of CSD procedure. The c-domain-oriented PZT film on ns-CN/Pt/SUS substrate exhibited enhanced remanent polarization of approximately 52 µC/cm 2 and lowered dielectric permittivity of approximately 230, which are superior to those of conventional PZT films with random crystal orientation and comparable to those of epitaxial PZT films grown on (100)SrRuO 3

One-axis-oriented Pb (Zr,Ti)O3(PZT) films were fabricated using a chemical solution deposition technique on (111)Pt/TiO2/(100)Si and Inconel625 substrates buffered by nanosheet Ca2Nb3O10(ns-CN). The (001)-oriented PZT crystals (Zr/Ti=0.40:0.60, tetragonal) were preferentially grown on (001)ns-CN/Inconel625, whereas the PZT crystals deposited on (001)ns-CN/(111)Pt/ TiO2/(100)Si exhibited preferential PZT(100) orientation. The resulting PZT film on (001)ns-CN/Inconel625 indicated remanent polarization of approximately 59 μC/cm2, which was significantly larger than that on (001)ns-CN/(111)Pt/TiO2/(100)Si.

No abstract