No abstract

Thermoplastic vulcanizates (TPVs) have attracted considerable attention as typical "green" polymers in recent years and have been widely used in industry because they combine the excellent resilience of conventional elastomers and the easy recyclability of thermoplastics. With a new understanding of the formation and agglomeration of the rubber nanoparticles in ethylene propylene diene monomer/polypropylene (EPDM/PP) TPV, we revealed a new mechanism for the morphology evolution of TPV during dynamic vulcanization (DV). The phase inversion in TPV is dominated by the formation and agglomeration of the rubber nanoparticles rather than the elongation and breakup of the crosslinked rubber phase as previously reported. The size of the rubber agglomerates increases with increasing DV time and then remains constant after DV. In addition, we studied the relationship between the cross-linking of the rubber phase, formation and agglomeration of the rubber nanoparticles, and phase inversion and variation of the rubber network during DV. This study provides guidance to control the microstructure of TPV in preparation of high performance TPV products for automobile and electronic applications.

No abstract

The breakup of the rubber phase in an ethylene-propylene-diene monomer (EPDM)/polypropylene (PP) blend at the early stage of dynamic vulcanization is similar to that in an unvulcanized EPDM/PP blend because of the low crosslink density of the EPDM phase. In this work, the minimum size of the rubber phase in the unvulcanized EPDM/PP blend was first calculated by using the critical breakup law of viscoelastic droplets in a matrix. The calculated results showed that the minimum size of the rubber phase in the unvulcanized blend was in the nanometer scale (25-46 nm), not the micrometer scale as reported in many works. Meanwhile, the actual size of the rubber phase in the thermoplastic vulcanizate (TPV) at both the early stage and the final stage of dynamic vulcanization was observed by using peak force tapping atomic force microscopy (PF-AFM). The results indicated that the EPDM phase indeed broke up into nanoparticles at the early stage of dynamic vulcanization, in good agreement with the calculated results. More interestingly, we first revealed that the micrometer-sized rubber particles commonly observed in TPV were actually the agglomerates of rubber nanoparticles with diameters between 40 and 60 nm. The mechanism for the formation of rubber nanoparticles and their agglomerates during dynamic vulcanization was then discussed. Our work provides guidance to control the microstructure of the rubber phase in TPV to prepare high performance TPV products for a wide range of applications in the automobile and electronic industries.

Summary: Three rubber‐based nanocomposites, natural rubber (NR), styrene‐butadiene rubber (SBR), and ethylene‐propylene‐diene rubber (EPDM) matrixes, were prepared with octadecylamine modified fluorohectorite (OC) by melt blending. X‐ray diffraction (XRD) revealed that the SBR/OC and EPDM/OC nanocomposites exhibited a well‐ordered intercalated structure and a disordered intercalated structure, respectively. In the case of the NR/OC nanocomposite, it exhibited an intermediate intercalated and even exfoliated structure. These results were in good agreement with transmission electron microscopy (TEM) observations. Furthermore, in the NR/OC and SBR/OC systems, the mixing process played a predominant role in the formation of nanometer‐scale dispersion structure, whereas the intercalated structure of EPDM/OC formed mainly during the vulcanization process. The tensile strength of SBR/OC and EPDM/OC nanocomposites loading 10 phr OC was 4–5 times higher than the value obtained for the corresponding pure rubber vulcanizate, which could be ascribed to the slippage of the rubber molecules and the orientation of the intercalated OC. For the strain‐induced crystallization NR, the exfoliated OC efficiently improved the modulus of the NR/OC nanocomposite relative to the pure NR. However, its hindrance on NR crystallization during the tensile process may be the main reason for the decrease in tensile strength of NR/OC.XRD diffraction patterns of three nanocomposites containing 10 phr organoclay.magnified imageXRD diffraction patterns of three nanocomposites containing 10 phr organoclay.