We report the discovery of a rule-breaking two-dimensional aluminum boride (AlB6–ptAl–array) nanosheet with a planar tetracoordinate aluminum (ptAl) array in a tetragonal lattice by comprehensive crystal structure search, first-principles calculations, and molecular dynamics simulations. It is a brand new 2D material with a unique motif, high stability, and exotic properties. These anti-van’t Hoff/Le Bel ptAl-arrays are arranged in a highly ordered way and connected by two sheets of boron rhomboidal strips above and below the array. The regular alignment and strong bonding between the constituents of this material lead to very strong mechanical strength (in-plane Young’s modulus Y x = 379, Y y = 437 N/m, much larger than that of graphene, Y = 340 N/m) and high thermal stability (the framework survived simulated annealing at 2080 K for 10 ps). Additionally, electronic structure calculations indicate that it is a rare new material with triple Dirac cones, Dirac-like fermions, and node-loop features. Remarkably, this material is predicted to be a 2D phonon-mediated superconductor with T c = 4.7 K, higher than the boiling point of liquid helium (4.2 K). Surprisingly, the T c can be greatly enhanced up to 30 K by applying tensile strain at 12%. This is much higher than the temperature of liquid hydrogen (20.3 K). These outstanding properties may pave the way for potential applications of an AlB6–ptAl–array in nanoelectronics and nanomechanics. This work opens up a new branch of two-dimensional aluminum boride materials for exploration. The present study also opens a field of two-dimensional arrays of anti-van’t Hoff/Le Bel motifs for study.

The cure kinetics of tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM) and 4,4′‐diaminodiphenylsulfone (DDS) as a cure agent in nanocomposites with multiwalled carbon nanotubes (MWNTs) have been studied with an isothermal differential scanning calorimetry (DSC) technique. The experimental data for both the neat TGDDM/DDS system and for epoxy/MWNTs nanocomposites showed an autocatalytic behavior. Kinetic analysis was performed with the phenomenological model of Kamal and a diffusion control function was introduced to describe the cure reaction in the later stage. Activation energies and kinetic parameters were determined by fitting experimental data. For MWNTs/epoxy nanocomposites, the initial reaction rates increased and the time to the maximum rate decreased with increasing MWNTs contents because of the acceleration effect of MWNTs. The values of the activation energies for the epoxy/MWNTs nanocomposites were lower than the values for the neat epoxy in the initial stage of the reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3701–3712, 2004

No abstract

An investigation was carried out into the cure kinetics of carbon nanofibers (CNF)/epoxy composites, composed of tetraglycidyl-4,4Ј-diaminodiphenylmethane (TGDDM) resin and 4,4Ј-diaminodiphenylsulfone (DDS) as a curing agent. The experimental data for both neat system and CNF/epoxy composites revealed an autocatalytic behavior. Analysis of DSC data indicated that the presence of carbon nanofibers had only a negligible effect on the cure kinetics of the epoxy. Kinetic analysis was performed using the phenomenological model of Kamal and two diffusion factors were introduced to describe the cure reaction in the latter stage. Activation energies and kinetic parameters were determined by fitting experimental data. Comparison between the two diffusion factors was performed, showing that the modified factor was successfully applied to the experimental data over the whole curing temperature range.

No abstract