No abstract

In order to ensure the operational reliability and information security of sophisticated electronic components and to protect human health, efficient electromagnetic interference (EMI) shielding materials are required to attenuate electromagnetic wave energy. In this work, the cellulose solution is obtained by dissolving cotton through hydrogen bond driving self-assembly using sodium hydroxide (NaOH)/urea solution, and cellulose aerogels (CA) are prepared by gelation and freeze-drying. Then, the cellulose carbon aerogel@reduced graphene oxide aerogels (CCA@rGO) are prepared by vacuum impregnation, freeze-drying followed by thermal annealing, and finally, the CCA@rGO/polydimethylsiloxane (PDMS) EMI shielding composites are prepared by backfilling with PDMS. Owing to skin-core structure of CCA@rGO, the complete three-dimensional (3D) double-layer conductive network can be successfully constructed. When the loading of CCA@rGO is 3.05 wt%, CCA@rGO/PDMS EMI shielding composites have an excellent EMI shielding effectiveness (EMI SE) of 51 dB, which is 3.9 times higher than that of the co-blended CCA/rGO/PDMS EMI shielding composites (13 dB) with the same loading of fillers. At this time, the CCA@rGO/PDMS EMI shielding composites have excellent thermal stability (THRI of 178.3 °C) and good thermal conductivity coefficient (λ of 0.65 W m-1 K-1). Excellent comprehensive performance makes CCA@rGO/PDMS EMI shielding composites great prospect for applications in lightweight, flexible EMI shielding composites. Graphic abstract

No abstract

The mending effect and mechanism of metal nano-particles in an area undergoing wear are quite important for both the fundamental theory of nano-tribology and the development of lubricant additives. This paper presents research on the mending effect of copper nano-particles added to lubricant oil. Pin-on-disk experiments and Scanning Electron Microscopy (SEM) observations show that copper nano-particles do display an excellent mending effect. The observation by Scanning Tunnelling Microscopy (STM) reveals that the mending effect results from the deposition of copper nano-particles onto the wear scar. It has also been disclosed by heating simulation that, due to nano-scale effects, which bring about decrease in the diffusion temperature of copper nano-particles, the heat generated by friction leads to the diffusion of copper nano-particles and their subsequent deposition, which finally results in the so-called mending effect.

Significantly improved thermal conductivities and a more accurate thermal conductivity model were achieved.