The surface charge density enhancement by incorporating conductive paths into organic/inorganic piezoelectric composites is considered to be an effective way to achieve high-performance piezoelectric nanogenerators (PENGs). However, it is challenging to boost the charge density of aligned piezoelectric nanofibers due to the difficulty in efficiently building well-distributed conductive paths in their dense structure. In this work, a charge boosting strategy was proposed for enhancing the surface charge density of aligned piezoelectric nanofibers, that is, synchronously preparing piezoelectric/conductive hybrid nanofibers to realize the effective conductive paths for transferring the underlying charges to the surface of the PDMS/BaTiO3 composites. To this end, antimony-doped tin oxide (ATO) conductive nanofibers and barium titanate (BaTiO3) piezoelectric nanofibers with the same preparation conditions were selected and synchronously prepared by the polymer template electrospinning technology, followed by the calcination process. Benefiting from the well-distributed conductive paths for transferring the charges, the open-circuit voltage and short-circuit current of a PENG with 12 wt% ATO in hybrid nanofibers reached 46 V and 14.5 μA (30 kPa pressure), respectively, which were much higher than the pristine BaTiO3-based PENG. The high piezoelectric performance of the developed PENGs guaranteed their great potential applications in powering wearable microelectronics and monitoring human activity. This charge boosting strategy via the piezoelectric/conductive hybrid nanofibers may inspire the further development of high-performance energy harvesting technology.

High performance is always the research objective in developing triboelectric nanogenerators (TENGs) for future versatile applications. In this study, a flexible ethyl cellulose/thermoplastic polyurethane (EC/TPU) nanofiber triboelectric layer with barium titanate (BTO) nanoparticles is proposed for high-performance TENGs, in which electrospun EC/TPU nanofiber membranes supply the high-roughness friction surfaces and piezoelectric BTO nanoparticles are further incorporated to boost the electric outputs by the synergistic effect of piezoelectricity and triboelectricity. Consequently, when the content of the BTO nanoparticle is 8 wt % in the EC/TPU (1:4 in weight ratio) nanofibers, the composite membrane displayed a stress of 9.25 MPa and a strain of 275.2%. The corresponding TENG achieves electric outputs of 125.8 V, 34.1 μA, and 1.68 W/m2, much higher than those of an individual piezoelectric nanogenerator or TENG. The TENGs are potentially used to supply energy for commercial LEDs and microelectronics and as self-powered sensors to monitor human physical training conditions. This research provides a guideline for developing TENGs with high performance, which is crucial for their long-term use.