An organoionic crystal of tetrabutyl-n-phosphonium tetraphenylborate thermally recovers its shape through superelasticity, similar to shape-memory alloys.

Generally, superelastic behavior cannot be expected in mechanically twinned crystals because there is essentially no strain on the interface that is a driving force for spontaneous shape recovery. However, we found that single crystals of 3,5-difluorobenzoic acid are superelastic organic crystals under mechanical twinning. The unexpected shape recovery can be explained by molecular distortion on the twinning interface, which suggests a new mechanism for superelasticity in molecular materials.

Ferroelasticity has been relatively well-studied in mechanically robust inorganic atomic solids but poorly investigated in organic crystals, which are typically inherently fragile. The absence of precise methods for the mechanical analysis of small crystals has, no doubt, impeded research on organic ferroelasticity. The first example of ferroelasticity in an organic molecular crystal of 5-chloro-2-nitroaniline is presented, with thorough characterization by macro- and microscopic methods. The observed cyclic stress-strain curve satisfies the requirements of ferroelasticity. Single-crystal X-ray structure analysis provides insight into lattice correspondence at the twining interface, which enables substantial crystal bending by a large molecular orientational shift. This deformation represents the highest maximum strain (115.9 %) among reported twinning materials, and the associated dissipated energy density of 216 kJ m is relatively large, which suggests that this material is potentially useful as a mechanical damping agent.

Superplasticity, which enables processing on hard-to-work solids, has been recognized only in metallic solids. While metallic materials and plastics (polymer solids) essentially possess high plastic workability, functional crystalline solids present difficulties in molding. Organic crystals especially are fragile, in the common view, and they are far from the stage of materials development. From the viewpoint of practical application; however, organic crystals are especially attractive because they are composed of ubiquitous elements and often exhibit higher performance than metallic materials. Thus, finding superplastic deformation of organic crystals, especially in a single-crystal-to-single-crystal manner, will pave the way for their material applications. This study confirmed superplasticity in a crystal of a simple organic compound: N,N-dimethyl-4-nitroaniline. The crystal exhibits single-crystal-to-single-crystal superplastic deformation without heating. This finding of “organosuperplasticity” will contribute to the future design of functional solids that do not lose their crystalline quality in molding.

Development of gas separation materials has been one of the basic requirements of industry. Microporous materials have adequate pores for gas separation and have contributed to the advancement of gas purification techniques. Because the simplest and most economical method would be membrane separation, various microporous membranes have been prepared and explored for their separation properties. However, a key issue remains as to how to generate defect-free membranes with practical gas permeance. Here we report the preparation of a well-oriented single-crystal membrane with high permeance by using a flexible single crystal of [Cu(2)(bza)(4)(pyz)](n) possessing one-dimensional (1D) penetration channels; this membrane exhibits anisotropic gas permeation through the 1D channels with high permselectivity for H(2) and CO(2). Although the diameter of the neck of the narrow channels is smaller than the kinetic diameters of the sample gases, various gases pass through the 1D channels. This report provides a new way of developing gas permeation membranes as sophisticated crystal devices for gas purification techniques.