No abstract

We developed and tested a prototype of an antibody microarray immunoassay for simultaneous quantitative detection of four typical mycotoxins (aflatoxin B1, ochratoxin A, zearalenone, and fumonisin B1) in corn samples. The test kit consisted of a nitrocellulose membrane layered with immobilized monoclonal antibodies against mycotoxins. During the assay, the mycotoxin-protein conjugates were biotinylated. The signal detection was enhanced by a combination of the biotin-streptavidin system and enhanced chemiluminescence (ECL). This improved the sensitivity of the assay. Under the optimized conditions, four calibration curves with goodness of fit (R2 > 0.98) were plotted. The results showed that the detection limits for aflatoxin B1, ochratoxin A, zearalenone, and fumonisin B1 were 0.21, 0.19, 0.09, and 0.24 ng/mL, with detection ranges of 0.47–55.69, 0.48–127.11, 0.22–31.36, and 0.56–92.57 ng/mL, respectively. The limit of detection (LOD) of this antibody microarray for aflatoxin B1, ochratoxin A, zearalenone, and fumonisin B1 in corn was 5.25, 4.75, 2.25, and 6 μg/kg, respectively. The recovery rates from the spiked samples were between 79.2% and 113.4%, with coefficient of variation <10%. The results of the analysis of commercial samples for mycotoxins using this new assay and the liquid chromatography-tandem mass spectrometry (LC-MS/MS) were comparable and in good agreement. This assay could also be modified for the simultaneous detection of other multiple mycotoxins, as well as low-weight analytes, hazardous to human health.

A one-step dual flow immunochromatographic assay (DICGA), based on a competitive format, was developed for simultaneous quantification of ochratoxin A (OTA) and zearalenone (ZEN) in corn, wheat, and feed samples. The limit of detection for OTA was 0.32 ng/ml with a detection range of 0.53-12.16 ng/ml, while for ZEN it was 0.58 ng/ml with a detection range of 1.06-39.72 ng/ml. The recovery rates in corn, wheat, and feed samples ranged from 77.3% to 106.3% with the coefficient of variation lower than 15%. Naturally contaminated corn, wheat, and feed samples were analyzed using both DICGA and liquid chromatography-tandem mass spectrometry (LC-MS/MS) and the correlation between the two methods was evaluated using a regression analysis. The DICGA method shows great potential for simple, rapid, sensitive, and cost-effective quantitative detection of OTA and ZEN in food safety control.

No abstract

Carbon dots (CDs), as a kind of carbonbased fluorescent nanodots (FNDs), not only retain the advantageous characteristics of carbon-based materials (e.g., low toxicity and biocompatibility) but also exhibit tunable fluorescence emission, low photobleaching, and undergo facile surface functionalization. Therefore, the prospect of applying these materials for analysis and detection, cell imaging, drug delivery, light-emitting devices, photocatalysis, biosensing, and cancer treatment is promising. Although the synthesis of carbon dots from green and renewable feedstocks as biomass carbon sources is possible, the controllability of the involved chemical reactions is poor, resulting in poor atom economy, low quantum yields, and, especially, extremely low yields of carbon dots. In addition, these disadvantages could lead to an increase in equipment requirements and could pose a safety risk because of the need for hydrothermal and solvothermal synthesis. Certain methods even require large amounts of acid/alkali, strong oxidants, or organic solvents, thereby complicating the postprocessing process and generating waste and emissions. This research aimed to implement a new idea, namely to "fabricate" rather than "synthesize" carbon-based FNDs from a certain kind of natural and small unsaturated molecule with surface activity relying on a self-assembling and self-crosslinking strategy in lieu of traditional approaches that involve uncontrollable reactions with unknown mechanisms including pyrolysis, dehydrolysis, polyconcensation, and carbonization. In this context, conjugated linoleic acid (CLA) has been studied extensively in our laboratory, and was found to have the self-assembly and self-crosslink characteristics required by the above innovative strategy. This motivated us to adopt CLA as a new carbon source in this study. First, CLA self-assembles into unsaturated fatty acid liposomes (ufasomes) in an aqueous solution of pH 8.6 at ambient temperature (15-25 °C), and then, the initiator Ammonium persulfate is added to induce self-crosslinking of the ufasomes at 80 °C to obtain firm and uniform nanoparticles. On this basis, the possibility of using them as FNDs is investigated. Consequently, FNDs based on self-crosslinked ufasomes (SCU-FNDs) are prepared in high FND yield of 73.9% after dialysis, with a consistent particle size (17 nm), a degree of self-crosslink (DSC) of 75%, and emission of bluish green fluorescence excited at 320 nm. Furthermore the "fabrication" route provided a clear solution of FNDs that could be applied directly without separation and purification and with no wasteful emissions, which is therefore beneficial for large-scale preparation. The experimental results showed that the fluorescence intensities of the SCU-FNDs are positively correlated with both the surface carboxyl groups and DSC results. A reasonable explanation for the former relationship is the effect of the restricted geometry of the ufasomes on the accumulation of oxygen atoms at the surface of FNDs, whereas the latter could be explai...