High-sensitivity X-ray detectors made of solution grown CsPbBr3 single crystals with high crystalline quality was reported in this work. The device with asymmetric electrodes configuration shows high sensitivity of 1256 μC Gy−1 cm−2.

Hydrogels are investigated broadly in flexible sensors which have been applied into wearable electronics. However, further application of hydrogels is restricted by the ambiguity of the sensing mechanisms, and the multi-functionalization of flexible sensing systems based on hydrogels in terms of cost, difficulty in integration, and device fabrication remains a challenge, obstructing the specific application scenarios. Herein, cost-effective, structure-specialized and scenario-applicable 3D printing of direct ink writing (DIW) technology fabricated two-dimensional (2D) transition metal carbides (MXenes) bonded hydrogel sensor with excellent strain and temperature sensing performance is developed. Gauge factor (GF) of 5.7 (0 − 191% strain) and high temperature sensitivity (−5.27% °C−1) within wide working range (0 − 80 °C) can be achieved. In particular, the corresponding mechanisms are clarified based on finite element analysis and the first use of in situ temperature-dependent Raman technology for hydrogels, and the printed sensor can realize precise temperature indication of shape memory solar array hinge.

Flexible strain sensors have been widely investigated with their rapid development in human-machine interfaces, soft robots, and medical care monitoring. Here, we report a new in situ catalytic strategy toward the fabrication of metallic aerogel hybrids, which are composed of vanadium nitride (VN) nanosheets decorated with well-defined vertically aligned carbon nanotube arrays (VN/CNTs) for the first time. In this architecture, the two-dimensional VN nanosheets as the main bone structure are favorable for the flexible devices due to their excellent structural compatibility during the repetitive deforming process. In addition, the sandwiched aerogel hybrids form highly conductive 3D network, affording outstanding sensitivity for the strain-responsive behaviors. Further, the VN/CNTs-based flexible strain sensors are successfully fabricated, showing a high gauge factor of 386 within a small strain of 10%, fast response, and extraordinary durability. The monitoring of physical signals and an actual real-time human-machine controlling system based on the sensors are also presented.