The world is rich in marine resources, and the use of seawater, sea sand and coral instead of fresh water, river sand and gravel can solve problems such as the scarcity of traditional materials for marine engineering construction. Additionally, fibre-reinforced polymer (FRP) bars have demonstrated excellent corrosion resistance performance, which can effectively solve the problem of the corrosion of steel in harsh marine environments. To study the bond performance between FRP bars and sea sand coral concrete (SSCC), 72 specimens of direct Pull-out were designed, and relevant tests were carried out to explore the effects of fibre types, bar diameters, bond lengths and SSCC strength grades. The results show that the bond strength between carbon fibre-reinforced polymer (CFRP) bars and SSCC was higher than that of basalt fibre-reinforced polymer (BFRP) bars and glass fibre-reinforced polymer (GFRP) bars. The splitting damage pattern occurred in most of the specimens; the bond strength between FRP bars and SSCC decreased with increasing diameter and bond length of FRP bars but increased with increasing SSCC strength grade. As a result, by fitting the bond-slip curves obtained from the tests, the bond-slip constitutive relationship between FRP bars and SSCC specimens was obtained, which clearly and precisely represents the bond failure process of SSCC with FRP bar reinforcement.

Traditional reinforced concrete columns have demonstrated poor seismic performance especially in corrosive environment as the reinforcement bars experience severe corrosion under such conditions. To overcome the problem of steel corrosion, glass fiber-reinforced polymer (GFRP) reinforced concrete columns have gained significant attention in recent years. However, the seismic performance of GFRP reinforced concrete column is not well understood yet. One of the main challenges associated with the use of GFRP bars is its brittle behavior. Therefore, it is necessary to investigate the mechanical properties and failure modes of GFRP reinforced concrete structures under seismic action. In this research, the seismic behavior of GFRP reinforced concrete columns and conventional columns under different axial compression ratios are analyzed by low-cycle repeated pseudo-static loading tests. As a result, the deformation and the seismic energy dissipation capacity of GFRP reinforced concrete columns are investigated and discussed. Furthermore, the failure mechanism of GFRP bar structure is studied to provide the basis for improving the seismic design method of GFRP reinforced concrete structure and modifying the code for seismic design. In addition, the influence of axial compression ratio on the seismic behavior of full GFRP reinforced concrete columns is investigated. The results of this experiment demonstrate that with the increase of axial compression ratio, the ultimate bearing capacity of GFRP reinforced concrete columns increases, while the deformation and the cumulative energy dissipation capacity decrease.

No abstract

No abstract