The geometric parameters of labyrinth channels play an important role in the hydraulic and anti‐clogging performance of drip emitters. In this study, the flow fields, individual representative sands and sand groups in the labyrinth channel of emitters, with dentation angles of 90°, 60°, 45° and 30°, were firstly simulated using a computational fluid dynamics discrete element method (CFD–DEM) of coupling. Particle tracking velocimetry (PTV) was used to trace individual representative sands. The numerical results were verified with clear water hydraulic performance tests and muddy water anti‐clogging performance tests. The results suggest that the discharge coefficient and flow exponent declined when the dentation angle of the labyrinth channel was reduced. A large number of sand groups were observed to enter the vortex areas and move in a circular manner. The time it took for particles to pass through the labyrinth channel lengthened when the velocity decreased and as a result, the probability of emitter clogging increased. Therefore, by using a recommended angle range of 90° to 60° and a combined higher hydraulic performance level, emitters were less likely to clog. It was a novel approach to adopt a CFD–DEM coupling method to conduct numerical analysis of individual sand particles and sand groups in the investigation of emitter anti‐clogging issues. The findings will increase the design efficiency of flow channels and will save human and material resources. © 2018 John Wiley & Sons, Ltd.

In this study, we propose a multifunctional weak measurement system that can measure the optical rotation and the refractive index of solution. The center wavelength of the output spectrum of such a system is sensitive to the optical rotation and the phase difference produced by total internal reflection. The optical resolution and refractive index resolution of the solution determined by the proposed method were 3.26 × 10–5° and 3.93 × 10–7 RIU, respectively, by measuring different concentrations of glucose solution. As the optical rotation and refractive index of the solution are important properties of the solution, this system can be used to determine the type of solute in the solution in the future.

Lung cancer is the most common and lethal malignant disease for which the development of efficacious chemotherapeutic agents remains an urgent need. Pristimerin (PRIS), a natural bioactive component isolated from various plant species in the Celastraceae and Hippocrateaceae families, has been reported to exhibit outstanding antitumor effects in several types of cells. However, the underlying mechanisms involved remain poorly understood. Here, we reported the novel finding that PRIS significantly suppressed lung cancer growth in conditionally reprogrammed patient-derived lung adenocarcinoma cells (CRLCs). We demonstrated that PRIS inhibited the cell viabilities, migrative and invaded abilities, and capillary structure formation of CRLCs. Furthermore, our results clarified that PRIS induced mitochondrial dysfunction through reactive oxygen species (ROS) generation, activation of caspase-9, caspase-3, and caspase-4, and expression of endoplasmic reticulum (ER) stress-associated proteins. Inhibition of ER stress by 4-PBA (4-phenylbutyric acid, a specific ER stress inhibitor) or CHOP siRNA transfection ameliorated PRIS-induced loss of mitochondrial membrane potential and intrinsic apoptosis. The present study also provides mechanistic evidence that PRIS suppressed the EphB4/CDC42/N-WASP signaling pathway, which is required for mitochondrial-mediated intrinsic apoptosis, activation of ER stress, and stimulation of caspase-4 induced by PRIS, and consequently resulting in suppressed cell viability, migration, and angiogenesis in CRLCs. Taken together, by providing a mechanistic insight into the modulation of ER stress-induced cell death in CRLCs by PRIS, we suggest that PRIS has a strong potential of being a new antitumor therapeutic agent with applications in the fields of human lung adenocarcinoma.

In the field of electrochemical energy storage systems, the use of in situ detection technology helps to study the mechanism of electrochemical reaction. Our group has previously in situ detected the electrochemical reaction in vanadium flow batteries by total internal reflection (TIR) imaging. In order to further improve the detection resolution, in this study, the weak measurement (WM) method was introduced to in situ detect the electrochemical reaction during the linear sweep voltammetry or the cyclic voltammetry tests with quantitative measurement of the absolute current density, which lays a foundation for replacing the TIR for two-dimensional imaging of electrochemical reactions in vanadium flow batteries, oxygen/hydrogen evolution reaction, surface treatments, electrochemical corrosion and so on.