In recent decades, quasi-zero stiffness (QZS) vibration isolation systems with nonlinear characteristics have aroused widespread attention and strong research interest due to their enormous potential in low-frequency vibration isolation. This work comprehensively reviews recent research on QZS vibration isolators with a focus on the principle, structural design, and vibration isolation performance of various types of QZS vibration isolators. The negative-stiffness mechanism falls into two categories by different realization methods: passive and active/semi-active negative-stiffness mechanisms. Representative design, performance analysis, and practical application are elaborated for each category. The results show that passive vibration isolation systems have excellent low-frequency vibration isolation performance under specific payload and design parameters, whereas active/semi-active vibration isolation systems can better adapt to different environmental conditions. Finally, the development trends and challenges of QZS vibration isolators are summarized, and the solved and unsolved problems are highlighted. This review aims to give a comprehensive understanding of the QZS vibration isolation mechanism. It also provides guidance on designing new QZS vibration isolators for improving their vibration isolation performance and engineering applicability.

In order to effectively control the low-frequency vibration of ship machinery, based on the improved multi-line spectrum adaptive control algorithm, a two-degree-of-freedom (two-DOF) active-passive hybrid vibration isolator composed of an electromagnetic actuator, rubber spring, and the hydraulic device is proposed. The dynamic model of the two-DOF vibration isolation system is established and the main control force demand of the vibration isolation system at different damping forces is analyzed. By introducing the improved wavelet packet decomposition algorithm with the Hartley block least mean square algorithm to the filter-x least mean square (FxLMS) algorithm, an improved wavelet packet Hartley block filter-x least mean square (IWPHB-FxLMS) algorithm is established. The experimental results show that the IWPHB-FxLMS algorithm has better control performance. Compared with the traditional FxLMS algorithm, the IWPHB-FxLMS control algorithm improves the convergence speed by 91.7% and the line spectrum power spectrum attenuation by 58.1%. The active-passive hybrid vibration isolator is based on multi-line spectrum adaptive control and can achieve good control effects under the excitation of multi-frequency line spectrum and constant frequency line spectrum.

Nonlinear energy sink (NES) systems, when applied to a physical system with multiple interference sources, exhibit abundant nonlinear dynamic behaviors. However, current research in this respect is limited within the theoretical scope of deterministic systems. According to the theory of cell mapping, this paper introduces a parallel restructured algorithm to improve the performance of cell mapping and cell processing, and a parallelized multi-degrees-of-freedom (DOF) cell mapping (PMDCM) method is given. With the method, the global behavior of NES systems is analyzed so that the dynamical behavior of multiple stable attractors within typical parameter intervals can be captured. The research results show that for NES systems, there is the phenomenon of multiple stable attractors coexisting in multiple typical parameter intervals, which occurs between periodic and periodic attractors, periodic and quasi-periodic, periodic and chaotic attractors. While revealing the corresponding relationship between different types of attractors and their basin of attraction, these findings verify that the new cell mapping method has high computational efficiency and accuracy and can provide a theoretical basis for the study of high-dimensional nonlinear systems' global behavior and optimal control.

No abstract

In recent times, there has been a significant focus on electromagnetic resonant shunt damping (ERSD) and quasi-zero-stiffness vibration isolators (QZS VI) as prominent solutions for vibration mitigation or energy harvesting. In this paper, an innovative retrofittable model is proposed for dual-functional energy harvesting and low-frequency vibration attenuation by combining the ERSD and two-stage quasi-zero-stiffness vibration isolator (TQZS VI). The viscous dissipative element between the TQZS VI upper and lower layers is implemented using an electromagnetic shunt transducer that is connected in parallel with a resonant RLC (resistor–inductor–capacitor) circuit. Firstly, the mathematical model of the electromagnetic resonant shunt series quasi-zero-stiffness isolator (ERS-TQZS VI) is developed. Then, the magnitude-frequency response equations of the ERS-TQZS VI system are approximately solved using the harmonic balance method (HBM) in combination with the pseudo-arc-length method (PLM). The analytical approach is validated using numerical simulations. Moreover, the force transmissibility and output power of the ERS-TQZS VI are defined, and detailed parametric analysis for energy harvesting and low-frequency vibration attenuation is performed to assess the critical design parameters that result in optimal performance of the ERS-TQZS VI. The results demonstrate that the ERS-TQZS VI exhibits a significant reduction in resonance peaks of low-frequency vibration while simultaneously enabling effective vibration energy harvesting.