Over 70% of a pupil's school life is spent inside a classroom, and indoor air quality has a significant impact on students' attendance and learning potential. Therefore, the indoor air quality in primary school buildings is highly important. This empirical study investigates the indoor air quality in four naturally ventilated schools in China, with a focus on four parameters: PM 2.5 , PM 10 , CO 2 , and temperature. The correlations between the indoor air quality and the ambient air pollution, building defects, and occupants' activities have been identified and discussed. The results indicate that building defects and occupants' activities have a significant impact on indoor air quality. Buildings with better air tightness have a relatively smaller ratio of indoor particulate matter (PM) concentrations to outdoor PM concentrations when unoccupied. During occupied periods, the indoor/outdoor (I/O) ratio could be larger than 1 due to internal students' activities. The indoor air temperature in winter is mainly determined by occupants' activities and the adiabatic ability of a building's fabrics. CO 2 can easily exceed 1000 ppm on average due to the closing of windows and doors to keep the inside air warmer in winter. It is concluded that improving air tightness might be a way of reducing outdoor air pollutants' penetration in naturally ventilated school buildings. Mechanical ventilation with air purification could be also an option on severely polluted days.

The enormous building energy consumption in Shanghai necessitates the identification of standard buildings to offer guidance for the adequate design of retrofitting strategies in order to promote a sustainable built and architectural environment. In this regard, this study develops a methodological approach to establish prototypical buildings using performance index system (PIS) founded on an on-site survey. Emphasis is focused on low-rise office buildings in Shanghai. A total of 10 office parks containing 136 single low-rise office buildings in Min Hang District were systemically selected for survey and data collection. The proposed PIS includes building orientation, number of floors, window/wall ratio, heat and cold source type, plan form, and construction year. Using cluster and correlation analysis, the surveyed buildings are classified based on the impact of each PIS on the annual building energy use intensity. Based on this approach, the most influencing indexes are construction year, the number of floors, window-wall ratio and building orientation. This result refines the surveyed building samples to four prototypical buildings as representative standards for low-rise office buildings. Subsequently, typical buildings representing each of the prototypical buildings were defined. The stipulated approach provides a systematic framework for building classification, characteristic-based evaluation of building energy performance and identification of key performance index for building retrofit purposes.

No abstract

Purpose From the 2000s onward, construction practices of urban residential buildings in China have shown a material transformation from clay brick to aerated concrete block. Moreover, the consumption of insulating materials for buildings has been increasing due to the new requirements in building energy-saving standards. This transformation and the increased consumption of insulating materials might have a vital impact on a building’s thermal comfort and its associated energy flows. Therefore, the purpose of this paper is to investigate the indoor thermal performance of urban residential buildings built with different materials and further discuss the correlations between indoor thermal comfort and the associated energy input. Design/methodology/approach This study investigated four residential buildings selected from four residential communities located in the cold climate zone of China. The Integrated Environment Solutions program was used to evaluate the thermal comfort levels and to quantify the operational energy consumption of the case study buildings. Additionally, the University of Bath’s Inventory of Carbon and Energy database was used to estimate the embodied energy consumption and CO2 emissions. Findings The study found that materials transition and increasing consumption did not necessarily improve indoor thermal comfort. However, the materials transition has significantly decreased the embodied energy consumption of urban residential buildings. Furthermore, the increased utilization of insulating materials has also decreased the heating and cooling energy consumption. Therefore, overall, the environmental impacts of urban residential buildings have been reduced significantly. Practical implications In the future, residential buildings completed in the 1990s will need regular maintenance, such as adding insulation. Residential buildings completed based on the latest energy-saving requirements should optimize their ventilation design, for example, by increasing the ventilation rate and by reducing solar heat gains in the summer. Originality/value This paper investigates the effects of the materials change on thermal comfort levels and the environmental impacts of urban residential buildings in the cold climate zone of China, as these have not been the focus of many previous studies.

Breast cancer has become one of the top five commonest causes of cancer death. The use of ferroptosis to induce the generation of reactive oxygen species (ROS) in cancer cells...