In order to improve the efficiency of electrostatic precipitators, a control system of constant current source based on Single Chip Microcomputer (SCM) is designed. In the control process, we use the pulse signal from microcontroller P1 port as digital signals of the switch. By changing the number of contact closure control, we achieve steady flow output of different magnitude. By using closed-loop feedback control, we achieve constant monitoring of dust concentration and ensure it compliance with outlet concentration of national requirements. The results show that microcontroller control system has a strong anti-interference, high accuracy, ease of programming, etc. Used in the electrostatic precipitator, collection efficiency can be further improved.

In order to improve the level of automation and realize remote control of the transformer temperature control system, a fast remote automatic control system that based on the chip TMS320C6713 was designed by us. Using four temperature sensors (Pt100) tow amplifier and analogy to digital (A/D) convertor detect deal with the signal of the temperature of winding and environmental. According with the temperature of transformer to control the cooling device switch on or off, the service life of the radiator was extended. In the design the digital signal processor (DSP) chip is communication with the central control room through the RS-485 bus, which makes the remote transformer temperature monitor into reality. In addition, this system is more versatility and reliability than the traditional device.

The main aim of this paper is improve the high voltage electrostatic separation efficiency of roll-type electrostatic separator. To this end, a method of controlling the roller to obtain the best rotate speed was introduced. Experiments of system design were performed on 315-2DP type Programmable Logic Controller (PLC) produced by Siemens, E6B2 - CWZ6C encoder provided by Omron and MM440 converter obtained from Siemens. According to the nature differences of the separation particles, presetting the roller rotation speed in the upper machine. Then it is downloaded to the PLC. Through the tail encoder of the motor to receive the signals, calculating the roller speed and feedback to the PLC to control the converter, then formed a closed-loop control system of the motor speed.

In order to achieve the automatic control of electrostatic precipitator (ESP) more efficiently and accurately, an ESP system combining hardware and software is designed. According to the requirement of the ESP system,the Electronic Design Automation (EDA) is introduced to the ESP control system and the system is divided into four modules.These sub-modules are designed and the simulation waveform of the system is ananalyzed,based on the Very-High-Speed Integrated Circuit Hardware Description Language (VHDL) programming language and Quartus software.The results show that the security, flexibility and reliabity of the system is improved by using EDA as the control ,which is a great value for generalization.

No abstract