In order to improve the level of automation and realize remote control of the transformer temperature control system, a fast remote automatic control system that based on the chip TMS320C6713 was designed by us. Using four temperature sensors (Pt100) tow amplifier and analogy to digital (A/D) convertor detect deal with the signal of the temperature of winding and environmental. According with the temperature of transformer to control the cooling device switch on or off, the service life of the radiator was extended. In the design the digital signal processor (DSP) chip is communication with the central control room through the RS-485 bus, which makes the remote transformer temperature monitor into reality. In addition, this system is more versatility and reliability than the traditional device.

In order to improve the efficiency of electrostatic precipitators, a control system of constant current source based on Single Chip Microcomputer (SCM) is designed. In the control process, we use the pulse signal from microcontroller P1 port as digital signals of the switch. By changing the number of contact closure control, we achieve steady flow output of different magnitude. By using closed-loop feedback control, we achieve constant monitoring of dust concentration and ensure it compliance with outlet concentration of national requirements. The results show that microcontroller control system has a strong anti-interference, high accuracy, ease of programming, etc. Used in the electrostatic precipitator, collection efficiency can be further improved.

The setting goals of process lubrication were not all-inclusive in the previous manufacturer of double cold reduction. Strip shape, surface quality, the fuel consumption of unit and rolling stability could not be considered comprehensively. Aimed at the equipment and production craft characters of double cold reduction unit, at the basis of putting forward the comprehensive control index of a strip-shaped fuel consumption cleanliness for the first time, ensuring the shape quality of strip, lowering the oil residue on strip surface, improving the cleanliness of strip surface and reducing fuel consumption were defined as control targets; besides, the control of slip and heat-scratches were defined as constraints. A complete comprehensive optimization technology of process lubrication regime was established and has been applied to a 1220 double cold reduction unit belonging to Baosteel in China. Rolling speed, surface quality and strip shape quality are improved effectively, and oil consumption is reduced, meanwhile, the productivity and rolling yield of unit are ensured. This technology has created economic benefits for domestic steel makers and has further extended application value.

As to the production of degreasing unit, fully integrated with the equipment and technological features of the line, the approach for the setting of coiling tension was changed, which was mainly tabular method in the past. Under the new idea, the degreasing process was closely integrated with the bell-type annealing for the first time. Then, to minimize the severity of stick breaks was set as the objective function, and no loose coil and no heart-shaped coil is took as the constraint condition. On these bases, a new comprehensive optimization model for the setting of coiling tension in degreasing unit was put forward. The relation between coiling tension and coil radius was obtained, which was a quadratic curve. This simple and practical technology can make the distribution of internal stress of coil more reasonable, and reduce the incidence of stick breaks, loose coil and heart-shaped coil defects effectively and improve production efficiency, quality and the metal yield.

It is urgent to study a new control system for improving the efficiency of electrostatic precipitator. The System-on-a-Programmable-Chip (SOPC) development board, which belongs to the series of Cyclone of Altera Company, is used as the development platform. Analog Digital (AD) conversion module, voltage control module and overall control module of the electrostatic precipitator are designed and the simulation waveform of the system is analyzed, based on the programmable logic device EP1C12Q240C6 and Very-High-Speed Integrated Circuit Hardware Description Language (VHDL) programming language. The results show that: by using Field Programmable Gate Array (FPGA) as the control, transformation of AD is accurate and fast and high voltage power supply is stable, which leads to a certain value for generalization.