Conducting thermal calculations of "hot" oil pipelines through which high-viscosity and high-sticking oils are transported is one of the main ones. Determining the rate of cooling of oil in a stopped pipeline is of practical importance. According to the cooling rate, the time to safely stop the "hot" pipeline is calculated. This is the time at which the "hot" oil pipeline doesn’t freeze and the station’s pressure is enough to overcome the shear stresses arising during the cooling f high-viscosity and high-sticking oil. Oil cooling in underground stopped pipelines depends on the temperature of the soil around it. Installed heat stabilizers designed to cool the soil can affect the cooling rate of the "hot" pipeline. We have carried out a numerical experiment using modern tools of mathematical modelling. The experiment showed that the installed soil heat stabilizers near the underground "hot" pipeline have an impact on the process of cooling oil. These stabilizers have reduced the time to safely stop the pipeline.

The use of modern complexes for calculating the designed pipeline systems and for predicting their behavior for a period of more than ten years is necessary in modern conditions of the constantly developing hydrocarbon market and the development of new northern territories for greater oil production. It will allow avoiding accidents and environmental disasters that have become more frequent in recent years due to the deterioration of existing equipment. The article presents a method for monitoring the main reliability parameters of underground oil pipelines, taking into account changes in soil foundations, mainly in the Arctic zone of the Russian Federation. An oil pipeline section is considered as an object for monitoring of heat engineering processes and their influence on the reliability of the system. We describe the main results of calculations of the oil pipeline section and simulate changes in soil foundations. We used a multilayer pipe with polyurethane foam insulation and coating for the calculations to improve the reliability characteristics. This pipe has showed the best results of modeling in comparison with the design pipe.

The supply of heat to oil media pumped by pipeline transport systems is one of the main problems in the oil industry. The article describes a method for supplying heat to oil-containing media using the energy of an electromagnetic field. The possibility of releasing surfaces in contact with oil sludge under the influence of electromagnetic fields has been shown by experiment. We describe the design and parameters of a biconical horn radiator of a microwave electromagnetic field operating at a frequency of 2 450 MHz. A method for generating energy and transmitting it to the emitter by means of a coaxial cable is shown. Testing the emitter in oil placed in an optically transparent and radio-tight double-walled tank is presented. The design of the stand allows us to safely examine the thermal process using a thermal imager. The installation made it possible to heat 7 liters of oil at 15 °C in 12 minutes.