A Novel Unsupervised Classification Method for Sandy Land Using Fully Polarimetric SAR Data

Accurate identification of sandy land plays an important role in sandy land prevention and control. It is difficult to identify the nature of sandy land due to vegetation covering the soil in the sandy area. Therefore, HJ-2A hyperspectral data and GF-3 Synthetic Aperture Radar (SAR) data were used as the main data sources in this article. The advantages of the spectral characteristics of a hyperspectral image and the penetration characteristics of SAR data were used synthetically to carry out mixed-pixel decomposition in the “horizontal” direction and polarization decomposition in the “vertical” direction. The results showed that in the study area of the Otingdag Sandy Land, in China, the accuracy of sandy land detection based on feature-level fusion and single GF-3 data was verified to be 92% in both cases by field data; the accuracy of sandy land detection based on feature-level fusion was verified to be 88.74% by the data collected from Google high-resolution imagery, which was higher than that based on single HJ-2A (74.17%) and single GF-3 data (88.08%). To further verify the universality of the feature-level fusion method for sandy land detection, Alxa sandy land was also used as a verification area and the accuracy of sandy land detection was verified to be as high as 88.74%. The method proposed in this paper made full use of the horizontal and vertical structural information of remote sensing data. The problem of mixed pixels in sparse-vegetation scenes in the horizontal direction and the problem of vegetation covering sandy soil in the vertical direction were both well solved. Accurate identification of sandy land can be realized effectively, which can provide technical support for sandy land prevention and control.

Section: Discussionmentioning

confidence: 99%

Methods of Sandy Land Detection in a Sparse-Vegetation Scene Based on the Fusion of HJ-2A Hyperspectral and GF-3 SAR Data

Zhong

et al. 2022

“…Further, to release the classification from prior knowledge, in 2021, Ref. [297] proposed an unsupervised classification network via a decomposition and large-scale spectral clustering method with super-pixels, also called ND-LSC. Figure 27 depicts the architecture, which mainly consists of two parts.…”

Section: Target Classificationmentioning

confidence: 99%

Polarimetric Imaging via Deep Learning: A Review

Liu

et al. 2023

Polarization can provide information largely uncorrelated with the spectrum and intensity. Therefore, polarimetric imaging (PI) techniques have significant advantages in many fields, e.g., ocean observation, remote sensing (RS), biomedical diagnosis, and autonomous vehicles. Recently, with the increasing amount of data and the rapid development of physical models, deep learning (DL) and its related technique have become an irreplaceable solution for solving various tasks and breaking the limitations of traditional methods. PI and DL have been combined successfully to provide brand-new solutions to many practical applications. This review briefly introduces PI and DL’s most relevant concepts and models. It then shows how DL has been applied for PI tasks, including image restoration, object detection, image fusion, scene classification, and resolution improvement. The review covers the state-of-the-art works combining PI with DL algorithms and recommends some potential future research directions. We hope that the present work will be helpful for researchers in the fields of both optical imaging and RS, and that it will stimulate more ideas in this exciting research field.

“…The traditional pixel-based PolSAR image interpretation results may bring a huge amount of computation and contain many misclassification regions resulting from speckle noise. Addressing the above issues, superpixel generation becomes an important step in PolSAR interpretation [4,5]. A superpixel is a set of continuous small regions composed of adjacent pixels with similar characteristics in the image, which can retain the spatial feature information of the original image.…”

Section: Introductionmentioning

confidence: 99%

Multiobjective Evolutionary Superpixel Segmentation for PolSAR Image Classification

Chu,

Zhang,

et al. 2024

Superpixel segmentation has been widely used in the field of computer vision. The generations of PolSAR superpixels have also been widely studied for their feasibility and high efficiency. The initial numbers of PolSAR superpixels are usually designed manually by experience, which has a significant impact on the final performance of superpixel segmentation and the subsequent interpretation tasks. Additionally, the effective information of PolSAR superpixels is not fully analyzed and utilized in the generation process. Regarding these issues, a multiobjective evolutionary superpixel segmentation for PolSAR image classification is proposed in this study. It contains two layers, an automatic optimization layer and a fine segmentation layer. Fully considering the similarity information within the superpixels and the difference information among the superpixels simultaneously, the automatic optimization layer can determine the suitable number of superpixels automatically by the multiobjective optimization for PolSAR superpixel segmentation. Considering the difficulty of the search for accurate boundaries of complex ground objects in PolSAR images, the fine segmentation layer can further improve the qualities of superpixels by fully using the boundary information of good-quality superpixels in the evolution process for generating PolSAR superpixels. The experiments on different PolSAR image datasets validate that the proposed approach can automatically generate high-quality superpixels without any prior information.