Achieving concentrated graphene dispersions in water/acetone mixtures by the strategy of tailoring Hansen solubility parameters

Abstract

Although exfoliating graphite to give graphene paves a new way for graphene preparation, a general strategy of low-boiling-point solvents and high graphene concentration is still highly required. In this study, using the strategy of tailoring Hansen solubility parameters (HSP), a method based on exfoliation of graphite in water/acetone mixtures is demonstrated to achieve concentrated graphene dispersions. It is found that in the scope of blending two mediocre solvents, tailoring the HSP of water/acetone mixtures to approach the HSP of graphene could yield graphene dispersions at a high concentration of up to 0.21 mg ml −1. The experimentally determined optimum composition of the mixtures occurs at an acetone mass fraction of ∼75%. The trend of concentration varying with mixture compositions could be well predicated by the model, which relates the concentration to the mixing enthalpy within the scope of HSP theory. The resultant dispersion is highly stabilized. Atomic force microscopic statistical analysis shows that up to ∼50% of the prepared nanosheets are less than 1 nm thick after 4 h sonication and 114g centrifugation. Analyses based on diverse characterizations indicate the graphene sheets to be largely free of basal plane defects and oxidation. The filtered films are also investigated in terms of their electrical and optical properties to show reasonable conductivity and transparency. The strategy of tailoring HSP, which can be easily extended to various solvent systems, and water/acetone mixtures here, extends the scope for large-scale production of graphene in low-boiling-point solutions.

Preparation of Gallium Sulfide Nanosheets by Liquid Exfoliation and Their Application As Hydrogen Evolution Catalysts

“…6, 40 10 g/L GaS in 90 mL of isopropanol was sonicated for 6 hours in three centrifuge tubes. The 90 mL of sonicated dispersion was centrifuged at 0.5 krpm for 60 16 min. The sediment was discarded and the supernatant was centrifuged again at 1 krpm for 60 min.…”

Large-Scale Production of Size-Controlled MoS2 Nanosheets by Shear Exfoliation

“…Perhaps the most versatile way of making two-dimensional nanosheets is by liquid phase exfoliation of layered crystals. [6][7][8][9] In this method, layered crystallites are ultrasonicated in certain stabilising liquids such as appropriate solvents 8,10,11 or solutions of surfactants [12][13][14] or polymers 15,16 . This results in the production of nanosheets which are stabilised against aggregation via the interaction with the liquid.…”

One-step in situ preparation of liquid-exfoliated pristine graphene/Si composites: towards practical anodes for commercial lithium-ion batteries

“…The 2D peak often reflects the information of the graphene thickness. [28][29][30] Compared to the bulk graphite ( Fig. 5(b)) and rGO, 31 the 2D peaks for graphene flakes in Fig.…”