An Image Processing Method for Extraction of the Stress Wave Reflection Period

Abstract

The stress wave reflection method is widely used in the detection of structure size and integrity due to its advantages of low environmental impact and convenience. The detection accuracy depends on the accurate extraction of the stress wave reflection period. The traditional peak–peak method (PPM) measures the time interval between the first two peaks of the reflected waves to extract the reflection period. However, human interpretation is not avoidable for identifying the weak peak due to signal energy leaks into the surrounding environment. This paper proposes an algorithm for automatic extraction of the stress wave reflection period based on image processing to avoid human interference. The image is the short-time Fourier transform (STFT) spectrogram of the reflected wave signal after applying wavelet denoising and quadratic self-correlation operations. The edge detection method of image processing is used to extract the periodically occurring trough in the image. Graying and filtering are performed to eliminate interference. The frequency of the trough distribution is calculated by using the fast Fourier transform (FFT), and then the reflection period of the stress wave is obtained. The effectiveness and accuracy of the proposed method are validated by measuring the different lengths of two buried metal piles in soil. Comparing with the existing method of extracting the stress wave reflection period, this new algorithm comprehensively utilizes the time–frequency domain information of the stress wave reflection signal.

A Study on Impact Force Detection Method Based on Piezoelectric Sensing

“…Relying on piezoelectric sensors, Li et al [ 33 ] proposed a method to quantitatively evaluate the debonding of concrete-filled steel tube members. Gong et al [ 34 ] proposed an automatic extraction algorithm for the stress wave reflection period based on image processing. In another work, Hei et al [ 35 ] presented a method to quantitatively evaluate the bolt connection state by using a single piezoelectric ceramic transducer and a wake wave.…”

Monitoring of Liquid Viscosity for Viscous Dampers through a Wireless Impedance Measurement System

“…In recent years, Structural health monitoring (SHM) methods have been increasingly used in civil engineering [21,22]. The definition of SHM is to monitor the status of the tested structure by using damage free monitoring technology [23,24] and data analysis means including a variety of digital signal processing [25,26]. It mainly aims to identify whether there is damage in the structure [27], determine the specific damage location [28], quantify the degree of structural damage, and evaluate the remaining service life of the structure [29].…”

A Novel Piezoceramic-Based Sensing Technology Combined With Visual Domain Networks for Timber Damage Quantification

“…For obtaining frequency features to achieve high accuracy in damage identification, time-frequency technologies have been widely applied in radar signal recognition (Ahmad et al, 2020), equipment fault detection (Ulloa and Barbieri, 2018), and nondestructive testing (Obuchowski et al, 2014;Dorafshan and Azari, 2020;Li et al, 2020). Gong et al (Gong et al, 2020) proposed an algorithm for the automatic extraction of the stress wave reflection period based on image processing to measure the different lengths of buried metal piles in soil. Le et al (Li et al, 2020) adopted time-frequency analysis to extract the instantaneous frequency of a vehicle-bridge interaction system and evaluated the bridge' state.…”