Assembly Programmable Logic Control (PLC) in the Rotary Dryer Machine for Processing Waste Liquid System

Abstract

Programmable Logic Controller (PLC) is widely used to control systems on the manufacturing industry, automotive industry and etc. PLC is used to regulate the production process and machine systems to work simultaneously and continue. PLC has system to regulate the movement of machine components, displacement system of product, system settings motion or displacement of other components. PLC is a control system with some advantages such as simple in design, easy to use and circuit modification, low cost, easy maintenance, high reliability and safe. In this paper, we will focus on the PLC that used in the control of equipment movement on the rotary dryer system for waste liquid processing. PLC will be control the movement of the motor for drum of dryer, heating system, water circulation in the wet scrubber system, vacuum cleaner and smoke systems. All these systems are connected by PLC and working by arranged the setting time of system. The first process, PLC will activate the motion system of motor to drive the dryer drum rotating to left or right side. Then the burner is active for heating the drum of dryer. Effect in this process made smoke and dust happen in the rotary dryer system. The pump automatically will be activating to spray water on a wet scrubber system to catch the dust and smoke. Dust and smoke will be inhaled by the blower and flow back into the rotary dryer machine. Therefore there is no smoke and dust flowing into the environment. The results show that the PLC can be control the motion system and processes machine rotary dryer to drying the waste liquid in short time. Such as 20 minutes to 5 liters of liquid waste volume and 30 minutes to 15 liters and made the waste liquid be friendly environment.

Pelatihan Pembuatan Mesin Penetas Telur Puyuh Otomatis Untuk Meningkatkan Pendapatan Masyarakat di Kelurahan Sukarami Bengkulu

“…Penerapan teknologi otomasi dapat dilihat pada bidang industri, manufaktur, pertanian/perkebunan/peternakan, perikanan dan lainnya (Andria et al, 2017) (Hendra et al, 2016) (Indriani et al, 2016) yang sangat membantu mengurangi waktu produksi, meningkatkan kualitas dan produktifitas, menjamin higienis proses dan mengurangi efek lingkungan. Penerapan teknologi otomasi ini sangat membantu mengurangi kebutuhan akan tenaga kerja serta area pemantauan yang semakin luas.…”

Analyze of Geometric Characteristic of Powder Reinforced Composite Material from Liquid Waste for Part of Motor Vehicle

“…Composite materials are commonly found in aircraft, automotive, manufacturing, and other industries. Composite materials based on the type of reinforcement consist of types of fibers, particles, and structures [5][6][7][8][9][10][11][12][13][14]. Fiber composite materials are made of fiber reinforcement, particle reinforcement, or powder particle composite and sheet reinforcement structural composites.…”

“…[14][15][16] In this study, the particle composite material is made of reinforcement powder made from liquid waste and used for the manufacture of motor vehicle body products (wing or bottom components). Composite reinforcing materials from liquid waste are obtained through the process of drying liquid palm oil or rubber waste using a rotary dryer in powder form [12][13]. The process of making two-wheel motor vehicle body products from composite materials using casting process by making molds and products using the hand-laying coating method.…”

“…Composite materials are commonly found in aircraft, automotive, manufacturing, and other industries [2,4]. Composite materials based on the type of reinforcement consist of types of fibers, particles, and structures [5][6][7][8][9][10][11][12][13][14]. In this study, the particle composite material is made from a reinforcing powder made from liquid waste and used for the manufacture of motor vehicle body products (wing or bottom components).…”

Applying Programmable Logic Control (PLC) for Control Motors, Blower and Heater in the Rubber Drying Processing

“…PLC has been used in many control systems such as rotary dryers for waste liquid processing, food processing, automotive part processing and etc. [2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17]. PLC application for the process control system or machine can be seen in pure milk processing using Omron CPM1A PLC, paint production process with TWIDO TWDLMDA20DTK PLC, Omron CP1L PLC as a control in moving goods into boxes, and others [7][8][9][10].…”