Bio-based poly (lactic acid)/high-density polyethylene blends as shape-stabilized phase change material for thermal energy storage applications

Lu, Xiang; Huang, Jintao; Kang, Benhao; Yuan, Teng; Qu, Jinping

doi:10.1016/j.solmat.2018.12.036

Cited by 50 publications

(15 citation statements)

References 31 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Melt blending of 50% PLA as support matrix and 50% HDPE as a phase change substance has been prepared for thermal energy storage applications with excellent reusability and thermal reliability. 15 The presence of microcrystalline cellulose fiber resulted in better mechanical properties and thermal stability for HDPE/ PLA blends. 16 This work is part of a larger project to evaluate coffee jar lids made of HDPE and PLA from a local company with the purpose of contributing to the jar's sustainability by reducing the use of HDPE.…”

Section: Introductionmentioning

confidence: 99%

“…Techniques that do not use compatibilizers for the manufacture of these mixtures have also been reported. Melt blending of 50% PLA as support matrix and 50% HDPE as a phase change substance has been prepared for thermal energy storage applications with excellent reusability and thermal reliability 15 . The presence of microcrystalline cellulose fiber resulted in better mechanical properties and thermal stability for HDPE/PLA blends 16 …”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Optimization of processing conditions and mechanical properties of banana fiber‐reinforced polylactic acid/high‐density polyethylene biocomposites

Rodríguez

Álvarez-Láinez

Orrego

2021

J of Applied Polymer Sci

View full text Add to dashboard Cite

show abstract

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Optimization of processing conditions and mechanical properties of banana fiber‐reinforced polylactic acid/high‐density polyethylene biocomposites

Rodríguez

Álvarez-Láinez

Orrego

2021

J of Applied Polymer Sci

View full text Add to dashboard Cite

show abstract

“…There are many kinds of phase-change material (PCM), which could be divided into solid–solid PCM, solid–liquid PCM, solid–gas PCM and liquid–gas PCM according to the phase-change process [ 96 , 97 ]. Among them, the volume of solid–gas PCM and liquid–gas PCM changes greatly in the process of energy-storage and release, which is not conducive to practical applications.…”

Section: Thermally Conductive Pcm (Thermal-storage Thermal Management Material)mentioning

confidence: 99%

Recent Advances in Design and Preparation of Polymer-Based Thermal Management Material

Zhang

Shi

2021

Polymers

View full text Add to dashboard Cite

The boosting of consumer electronics and 5G technology cause the continuous increment of the power density of electronic devices and lead to inevitable overheating problems, which reduces the operation efficiency and shortens the service life of electronic devices. Therefore, it is the primary task and a prerequisite to explore innovative material for meeting the requirement of high heat dissipation performance. In comparison with traditional thermal management material (e.g., ceramics and metals), the polymer-based thermal management material exhibit excellent mechanical, electrical insulation, chemical resistance and processing properties, and therefore is considered to be the most promising candidate to solve the heat dissipation problem. In this review, we summarized the recent advances of two typical polymer-based thermal management material including thermal-conduction thermal management material and thermal-storage thermal management material. Furtherly, the structural design, processing strategies and typical applications for two polymer-based thermal management materials were discussed. Finally, we proposed the challenges and prospects of the polymer-based thermal management material. This work presents new perspectives to develop advanced processing approaches and construction high-performance polymer-based thermal management material.

show abstract

“…High density polyethylene is one of the cheaper synthetic polymers with a combination of outstanding physical, chemical, mechanical and thermal properties [10]. PLA was blended with High density polyethylene (HDPE) [11][12][13][14][15] to balance the cost effective issue of PLA and enhance the degradability of HDPE. however, no studies had been published about factors which effect die swell behavior of PLA/HDPE blend melts.…”

Section: Introductionmentioning

confidence: 99%

Evaluation of Die Swell Behavior During Capillary Extrusion of Poly(lactic acid)/ High density polyethylene Blend Melts

Alzarzouri

Deri²

2020

Technium

View full text Add to dashboard Cite

Poly lactic acid (PLA) and High density polyethylene (HDPE) have been blended in a Brabender plastograph in the molten state. The melt die swell of the blends has been studied by using a capillary rheometer. Effects of the capillary dimensions, shear stress, shear rate, temperature and blending ratio on die swell of PLA/HDPE blend melts were investigated. The results showed that die swell ratio decreased with increasing of capillary length and temperature while it increased with increasing of shear stress, shear rate and capillary diameter. It was also found that the plots of die swell versus blending ratio go through a maximum for blending ratio PLA/HDPE (60/40).

show abstract

Bio-based poly (lactic acid)/high-density polyethylene blends as shape-stabilized phase change material for thermal energy storage applications

Cited by 50 publications

References 31 publications

Optimization of processing conditions and mechanical properties of banana fiber‐reinforced polylactic acid/high‐density polyethylene biocomposites

Optimization of processing conditions and mechanical properties of banana fiber‐reinforced polylactic acid/high‐density polyethylene biocomposites

Recent Advances in Design and Preparation of Polymer-Based Thermal Management Material

Evaluation of Die Swell Behavior During Capillary Extrusion of Poly(lactic acid)/ High density polyethylene Blend Melts

Contact Info

Product

Resources

About