Critical-Dimension Measurement using Multi-Angle-Scanning Method in Atomic Force Microscope

Abstract

We have developed a new critical dimension (CD) measurement technique using atomic force microscope (AFM) which can measure width-dimensions and examine sidewall-shapes of fine patterns on a wafer. The technique employs a flared-type tip in combination with digital probing and multi-angle scanning mechanism that allows the tip to trace the sidewalls on both sides of a feature (or trench) by making physical contacts with the sidewall surface. First, by using finite element method (FEM) we analyzed deformation of the tip and cantilever to compensate errors caused by the deformation. To verify our compensation method we measured quartz reference patterns either with perpendicular sidewalls or undercuts. In this paper we will describe the applications and usefulness of this multi-angle operation and show some measurement results of ArF resist patterns with 200 nm width and 400 nm depth that were obtained with a flared tip of 120 nm diameter.

Cantilever Tilt Causing Amplitude Related Convolution in Dynamic Mode Atomic Force Microscopy

“…And the measured 16 is an estimation of the cantilever tilt angle, which is designed to be 12 in the AFM used in the experiments. 15 Therefore, the dynamic convolution model is of special significance to precisely and quantitatively measure the sharp nanostructures and will be especially useful in CD measurements 16,17 and in the probe characterization. 7,18 For the critical dimension measurements in dynamic mode, the amplitude effect should be removed to get more accurate results.…”

New developments at PTB in 3D-AFM with tapping and torsion AFM mode and vector approach probing strategy

“…The VAP method is similar to a step-in measurement method proposed in [8], and the difference is that the "VAP" method can work both in contact and dynamic modes. Using the VAP method, the structure is measured point by point.…”

Three-Dimensional Atomic Force Microscopy for Sidewall Imaging Using Torsional Resonance Mode

“…AFM cantilevers with special tips have been applied in different measurement ways. Murayama et al have developed a multiangle step in method with a sharpened tip [ 14 , 15 ]. In their method, the tip probed the surface point-by-point at different angles in a static mode.…”