DC arc flash calculations — Arc-in-open-air & arc-in-a-box — Using a simplified approach (Multiplication factor method)

Abstract

This paper suggests a method for calculating the incident energy and the arc flash boundary (AFB) distance for dc systems when an arc-in-a-box situation is involved. The method uses the dc maximum power method and a multiplying factor instead of using distance exponents. The method may also be used for an arc-in-open-air by using a multiplying factor of 1. It is based on the basic assumption that the spherical energy density can be increased to a new value to account for the additional reflected heat radiation from a box situation and that the ratio of the new value to the spherical energy density equals a multiplying factor for correcting -from the energy density for an arc-in-open-air situation to an arc-in-a-box situation, based on a simplified equation or methodology. When calculating the AFB, the method requires the use of an iterative process , since the multiplying factor is a nonlinear variable and is based on the distance from the arc. This paper should provide a good starting point for further discussion and development regarding dc arc-in-a-box situations.Index Terms -arc-in-a-box, dc maximum power method, multiplying factor.

A Review of Commonly Used DC Arc Models

“…Inspired by Ammerman's work, Fontaine [25] further extended Wilkins' iterative technique and more comprehensively presented the application of the Wilkins' a and k factors in determining the incident energy projected from enclosures. Wilkins' constants and the effective multipliers used to calculate the dc enclosure incident energy density E 1 from the dc open-air incident energy E s are provided in Table II for various worker distances. Wilkins used the 1584 data set (310 entries) and 37 additional tests performed at Ferraz Shawmut to develop formulas for predicting the ac arc current and incident energy density generated from a three-phase arcing fault.…”

Safe Distances From a High-Energy Capacitor Bank for Ear and Lung Protection

“…To calculate the exposure from an arc flash (16), it is also assumed that all of the stored energy is converted to the radiant energy of the arc flash, and then spreads out over a spherical area…”