Design of IoT-Based Home Fire Detection System Equipped with a Data Logger

Abstract

In Industrial Era 4.0, one of the solutions to secure a house from potential fires is to design a smart home. The smart home design described in this paper is the design of a home monitoring system for potential fires. Home fire early detection monitoring system is designed based on the IoT concept and is equipped with a data logger. Data loggers function as data logging and data recorders from time to time. The hardware system design consists of Arduino Mega2560, ESP8266, fire sensor, gas sensor and datalogger module as data storage. The software design that also functions as a system monitoring display is the Blynk application on Android smartphones. Fire sensor and gas sensor activities were recorded on the data logger module. The system test was carried out around the gas stove in the kitchen room. The system design results were displayed via the Blynk application on a smartphone. Fire detection system is a change in the Virtual Button from the initial color to red. While the monitoring display of the gas detection system is in the form of moving the Virtual Level when a gas leak is detected. Fire sensor activity recording data from the datalogger is displayed in the form of a graph of the relationship of the working voltage of the fire sensor versus time. While the data recording of gas sensor activity from the datalogger is displayed in the form of a graph of the relationship of gas concentration versus time. All system response results and graphic data are displayed in realtime through the Blynk application on a smartphone. In addition, system performance data records are stored on a micro SD card for further analysis. From the results of the design of this system is expected to be a reference of home monitoring technology from potential fire equipped with a data storage system.

Internet of Things-Based Fire Alarm Navigation System: A Fire-Rescue Department Perspective

“…In addition to affordability, effectiveness, and response, some issues still need to be addressed. Due to the difficulties outlined above, this research aims to develop a system that can detect heat and smoke using a fire alarm system by utilizing IoT technology that makes it more reliable and effective [33]. With the IoT, the system reads the data of heat and flame and analyzes it, and then immediately sends a call to the fire station through GSM and informs about its location.…”

Nine Channel Data Logger to Measure Temperature Distribution on Dry Stelizer based on Andoid system

“…Based on the problems above, the author intended to make a tool entitled data logger with 9 channels on dry sterilizer which had 9 channels and there was measurement data transmission via bluetooth using the HC 05 module [16][17] which can appear on android via the blynk application in graphic [18] form and using sensors thermocouple type K as the temperature sensor and ATMEGA2560 as a data processor [19] [20].…”

Rancang Bangun Alat Penanganan Kebakaran Otomatis pada Rumah Menggunakan Arduino Atmega 2560

“…Selain itu, dengan adanya Arduino Atmega 2560, konfigurasi pin tidak akan terlalu banyak dilakukan. Kelebihan lainnya adalah papan mikrokontroler ini menyediakan banyak pin lain untuk pengembangan sistem seperti tersedianya tambahan tiga pasang port komunikasi serial (Tx/Rx) [12]. Perbedaan perancangan alat penanganan kebakaran otomatis pada riset ini memfokuskan pada penggunaan modulei Arduino Armega 2560 sebagai piranti utama untuk mengontrol dan mengolah data input dan output dari komponen gerakan seperti sensor api, water pump, buzzer, relay.…”