Electrical and catalytic properties of SnO2/TiO2 measured in operando conditions

Abstract

The electrical conductivity and the catalytic activity of SnO 2 loaded TiO 2 (anatase) particles were investigated in operando conditions. SnO 2 depositions over commercial TiO 2 samples (Sigma Aldrich and Rhone Poulenc) were obtained by the impregnation method. The samples were characterized by XRD, SEM/EDX and BET-N 2 adsorption techniques. The AC electrical conductivity of the samples were measured between 25 and 400°C under various atmospheres. The effect of the reactant mixture on the electrical conductivity and the catalytic performances of the samples were tested in propene oxidation. The results showed that the conductivity of SnO 2 /TiO 2 samples depends strongly on the surface area of TiO 2 support. The reducing effect of propene is more evident for higher surface area catalysts, these one showing also higher activity. On the other hand, the SnO 2 deposition results in an increase of catalytic performances.

Electrochemical Assessment of Highly Reversible Sno2−Coated Zn Metal Anodes Prepared Via Atomic Layer Deposition for Aqueous Zn-Ion Batteries

“…Thereafter, Liu et al coated Al 2 O 3 , a commercially relevant ALD processed material, and investigated the effect of this protective lm coating at varying thicknesses [23]. SnO 2 has been occasionally used as protective layer in other elds of research [26,27] but has never been explored as a protective layer for ZIBS anode to date.…”