Electrospun polymeric membranes: Potential removal of endocrine disrupting compounds using solid membrane extraction and filtration processes

Abstract

The present study aims to prepare polymeric membranes by electrospinning to apply in the removal of estrone (E1), 17β‐estradiol (E2), and 17α‐ethinylestradiol (EE2) in aqueous samples. Polymeric membranes of polyamide‐6 (PA6), polycaprolactone (PCL), polylactic acid (PLA), and poly (butylene adipate‐co‐terephthalate) (PBAT) were obtained, characterized, and tested as sorbent material in processes of solid membrane extraction (SME) and membrane filtration. The efficiencies of the membranes after washing and/or conditioning processes were compared. The characterizations showed membranes with nanometer‐diameter threads (between 250 and 1200 nm, on average). The four membranes' morphology, chemical composition, and thermal stability were like previous works. PBAT membranes were considered the most effective SME technique as a differential, with 44%–71% removal. For the membrane filtration process, the highest removal values were obtained for the PBAT membrane (82%–91%), which was also efficient in filtering a surface water sample from River Guaíba. PBAT polymeric membrane effectively removes and recovers the studied hormones, lowering production costs and allowing internal and external modifications. These aspects demonstrate that the obtained membranes offer an efficient material in extracting E1, E2, and EE2, of high simplicity, low cost, and green chemistry.

Nanocarbon Dimensionality and Oxidation Degree Influence the Sorption of Atenolol: Implications for Water Treatment

“…Many solutions have been tested in recent years to efficiently remove drugs like atenolol from aqueous systems, such as advanced oxidative processes and photodegradation, ,,, catalysis, biological processes, ozonation, and nanofiltration . Chlorination was also able to degrade atenolol effectively but, at the same time, generated many byproducts with high toxicity. , Therefore, implementing technologies that apply porous materials to remove pharmaceuticals from water through the sorption processes has gained much attention in recent years. , Many materials are used to remove different organic compounds. − Among the materials used to remove atenolol from water are activated carbons, ,− montmorillonite, , kaolinite, porous metal–organic frameworks (MOF), polymers, multiwalled carbon nanotubes (MWCNT), − and graphene oxide (GO). , …”