Evaluation of soft switching for EV and HEV motor drives

Abstract

Soft switching has the potential of reducing switch stresses and of lowering the switching losses as compared to hard switching. For this reason, several soft-switching topologies have been presented in the literature. Each topology has some advantages. Their operation, however, requires additional active and/or passive elements. This introduces additional cost and complexity. To understand the effectiveness of the soft-switching technique, when applied to electric vehicle (EV) and hybrid electric vehicle (HEV) systems, it may be necessary to first evaluate their system requirements and performance. This evaluation process would require knowledge of the vehicle dynamics. The vehicle load requires a special torque-speed profile from the drivetrain for minimum power ratings to meet the vehicle's operational constraints, such as initial acceleration and gradability. The selection of motor and its control for EV and HEV applications are dictated mainly by this special torque-speed requirement. As a consequence, this requirement will have a strong influence on the converter operation. This paper makes an attempt to evaluate EV and HEV running in both standard Federal Test Procedure 1975 city driving and highway driving cycles. A simplified analysis will be carried out for several of the most commonly used electric motors operating on the optimal torque-speed profile. Special attention is given to the converter conduction and switching losses. By analyzing the switching losses, and by assuming that an ideal soft-switching scheme will have zero switching losses, one can evaluate the improvement in the system efficiency if a soft-switching control is used. The relative significance of soft switching for EV and HEV systems will then be established.Index Terms-Electric vehicle/hybrid electric vehicle soft-switching evaluation, soft-switched electric vehicle/hybrid electric vehicle motor drives, soft switching.

A comprehensive review on choice of hybrid vehicles and power converters, control strategies for hybrid electric vehicles

“…The zero-voltage switching and for zero-current switching of the power semiconductor switches or devices are achieved by softswitching 58 technique. The soft-switching techniques have been used extensively in high-power bidirectional DC-DC converters irrespective of the type, ie, isolated or nonisolated DC-DC converter.…”

Simulation of a photovoltaic panel supported real time hybrid electric vehicle

“…In literature study, various electric vehicle technologies to enable the simulation programme and the electric motor, energy storing form and force transmission techniques, which are required to start the electric vehicle, were reviewed [9], [10].…”

High efficiency three-phase soft-switching inverter for electric vehicle drives

“…The EV utilizes electric motor for propulsion and battery as the only source of energy. With limited source of energy, efficiency is a major concern, which leads directly to the range of the vehicle [10]. In order to improve the system efficiency, several types of soft-switching inverters have been studied in the EV application.…”