Implementation of Virtual Sensors for Monitoring Temperature in Greenhouses Using CFD and Control

Abstract

Virtual sensing is crucial in order to provide feasible and economical alternatives when physical measuring instruments are not available. Developing model-based virtual sensors to calculate real-time information at each targeted location is a complex endeavor in terms of sensing technology. This paper proposes a new approach for model-based virtual sensor development using computational fluid dynamics (CFD) and control. Its main objective is to develop a three-dimensional (3D) real-time simulator using virtual sensors to monitor the temperature in a greenhouse. To conduct this study, a small-scale greenhouse was designed, modeled, and fabricated. The controller was based on the convection heat transfer equation under specific assumptions and conditions. To determine the temperature distribution in the greenhouse, a CFD analysis was conducted. Only one well-calibrated and controlled physical sensor (temperature reference) was enough for the CFD analysis. After processing the result that was obtained from the real sensor output, each virtual sensor had learned the associative transfer function that estimated the output from given input data, resulting in a 3D real-time simulator. This study has demonstrated, for the first time, that CFD analysis and a control strategy can be combined to obtain system models for monitoring the temperature in greenhouses. These findings suggest that, generally, virtual sensing can be applied in large greenhouses for monitoring the temperature using a 3D real-time simulator.

Simulation of Steady‐State Temperature Rise of Electric Heating Field of Wireless Sensor Circuit Fault Current Trigger

“…The AC-DC circuit designed in this paper requires the load regulation rate not to exceed 15%/A. (6) The AC-DC circuit designed in this article requires conversion efficiency not less than 85%.…”

“…The wireless sensor network is a multihop self-organizing network, which is formed by a large number of cheap micro sensor nodes in the monitoring area through wireless communication [5]. The wireless sensor network connects the physical information of the objective world through a wireless network, which greatly expands people's ability to obtain information and provides people with the most direct and true information [6].…”

Crop Management in Controlled Environment Agriculture (CEA) Systems Using Predictive Mathematical Models

“…(1) Dividing the daily PG (mol C m 2 Original MEC model time profile of CQY (a) and CUE (b) for lettuce (blue lines), which was considered to be constant throughout the whole crop cycle; and for other crops (orange lines), in which CQY (a) was considered to be constant until the onset of senescence (t Q ), to linearly decrease till the time of harvesting (t M ), while CUE (b) was considered to be constant.…”

“…Environmental control is a key factor to increase plant productivity in controlled environment agriculture (CEA) [1]. Recently, increased interest has been directed towards plant production in closed facilities (e.g., plant factories, vertical farms, indoor-growing modules) [2][3][4]. However, with the introduction of advanced monitoring and control technologies, it becomes necessary to properly discern plant/microclimate interaction, modulate environmental parameters, and manage cultivation factors.…”

Turbulent Kinetic Energy Distribution of Nutrient Solution Flow in NFT Hydroponic Systems Using Computational Fluid Dynamics

“…Food production is increasingly becoming a major worldwide concern [1]. Hydroponics is an innovative strategy to produce more with less, and it plays an important role in areas unsuitable for conventional farming, such as arid and degraded soils [2].…”