“…In general, the slump of RAP concrete was lower than the control mix [31], and the mixes containing 100% RAP resulted in high stiffness [32]; however, for reduced RAP content, the admixtures reached the same class as control concrete [32], and in some cases, even registered a slump increase [33]. The air content experimented with This is important in Italy, which has the second-highest quantity of available RAP in the EU (9.5 Mt) [21], yet only 20% of that material is reused [19] due to regulatory limits, which, depending on the bitumen type, allow only a maximum of 30%, 25%, and 15% of RAP to be used in bases, base-binders and binders, and wear courses, respectively [22][23][24]. Finding another way to employ RAP can help valorize valuable waste that otherwise will be lost.…”