Advances in Cryogenic Engineering Materials 2000
DOI: 10.1007/978-1-4615-4293-3_18
|View full text |Cite
|
Sign up to set email alerts
|

Insulation Systems for NB3SN Accelerator Magnet Coils Fabricated by the “Wind and React” Technique

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1
1
1

Citation Types

0
12
0

Year Published

2001
2001
2016
2016

Publication Types

Select...
6
1

Relationship

0
7

Authors

Journals

citations
Cited by 11 publications
(12 citation statements)
references
References 3 publications
0
12
0
Order By: Relevance
“…A typical approach is to remove the sizing by heating the glass tape to 350-450C in air before winding the cable [3,6]. The effect of removing the sizing is to leave the glass fibre vulnerable to damage during winding.…”
Section: Desizingmentioning
confidence: 99%
“…A typical approach is to remove the sizing by heating the glass tape to 350-450C in air before winding the cable [3,6]. The effect of removing the sizing is to leave the glass fibre vulnerable to damage during winding.…”
Section: Desizingmentioning
confidence: 99%
“…Superconducting dipole magnets used for accelerators provide high magnetic fields up to 15 tesla [12][13][14] .…”
Section: ) Superconducting Magnets For Particle Acceleratormentioning
confidence: 99%
“…This flexibility of reshaping the cross-section enables over-braiding of the Rutherford cable that has a relatively rectangular cross section making it a suitable alternative for fibre tape. The requirements of the fibre component of the insulation include the need to have good radiation resistance, temperature resistance of around 700ºC, reasonable cost, commercial availability and free of boron. S glass (R glass in Europe) has a higher recrystallization temperature (~750°C) than that of E glass 13 . Although E-glass is easily available commercial glass fibre, one of the constituents of the fibre is boron trioxide (B 2 O 3 ) 19 .…”
Section: ) Braiding Of Rutherford Cables A) Insulation Requirementsmentioning
confidence: 99%
“…The cable uses ITER-type Internal Tin strand by Alsthom/MSA, with (12 T, 4.2 K) 750 A/mm and 19 m. Extracted strand measurements show cabling degradation within 10%. Several technology studies were carried out in preparation for magnet fabrication: special insulation was developed using a thin (60 m) quartz fiber tape [51]; thermo-mechanical properties of 10-stack samples were measured to verify that coil dimension can be controlled to the required accuracy, and to provide input for the mechanical analysis; and a splicing technique using intermediate Nb Sn-NbTi connections was developed. Magnet test is planned for March 2003.…”
Section: A Shell-type Dipoles and Quadrupolesmentioning
confidence: 99%