Life cycle assessment of silicon wafer processing for microelectronic chips and solar cells

Abstract

Purpose The life cycle assessment of silicon wafer processing for microelectronic chips and solar cells aims to provide current and comprehensive data. In view of the very fast market developments, for solar cell fabrication the influence of technology and capacity variations on the overall environmental impact was also investigated and the data were compared with the widely used ecoinvent data. Methods Existing material flow models for silicon wafer processing for microelectronic chips and solar cells used for engineering and planning formed a starting point for this analysis. The models represent an average of widely used processes and associated process equipment. The resulting input/output tables formed the data basis for the life cycle assessment. This is a cradle-to-gate investigation, consisting of primary gate-to-gate data for wafer processing. The upstream processes of the necessary inputs were supplemented with data from ecoinvent v2.0. Subsequent manufacturing steps, utilization, and waste disposal of the final products were not included. The software used for creating the inventory and impact assessment was Umberto version 5.5. The Impact 2002+ method was applied for impact assessment. Results For both semiconductor and solar cell fabrication, energy consumption and upstream chemicals production are most relevant for the overall potential environmental impact when only the gate-to-gate processes are considered. The upstream process for wafer production is dominant in solar cell fabrication, but exerts little influence on semiconductor fabrication. In the case of semiconductor fabrication, a comparison with the present ecoinvent dataset "wafer, fabricated, for integrated circuit, at plant" shows large differences. Conclusions In the case of silicon solar cells, the results of this study and the ecoinvent data are very similar and the impact of different fabrication processes appears to be minor.

Introducing natural thermoplastic shellac to microfluidics: A green fabrication method for point-of-care devices

“…In order to estimate the environmental impact connected to the fabrication process of microsystems, single indicators such as energy consumption of the fabrication of MEMS products of certain complexity, fabrication technology, and application field have been reviewed. 1 Additional data related to the environmental impact of microsystems fabrication can be adopted from the semiconductor industry, 2,3 as fabrication technologies of MEMS and semiconductor manufacturing are similar in terms of basic processes, as well as processing environment (e.g., cleanroom). Reviewing these data, three conclusions can be drawn:…”

“…For example, for the fabrication of logic chips, at least 4 g of toxic substances and 10 g of corrosive substances are generated per cm 2 chip area (data derived from Ref. 3, for more information please refer to the supplementary material of this paper).…”

Life cycle assessment of structured corrugation SiC-foam packing

“…CML2002 (Guinée et al, 2001), but also developed new concepts for human toxicity and ecotoxicity (Schmidt et al, 2011). This method can provide both mid-point and endpoint results based on the life cycle inventory (LCI) results.…”

An eco-design tool for manufacturers of semiconductor technologies: Looking for environmental opportunities in the design phase

“…Since the last decade, environmental analysis of microchips has been progressing towards LCA [10]- [11]. However, it is important to keep in mind that main challenges still remain in developing LCA tools to improve data modeling, keep pace with technology changes and handle uncertainty [12]- [13].…”