Low-temperature firing and microwave dielectric properties of MgTiO3 ceramics with Bi2O3–V2O5

Relationships between Zr substitution for Ti and microwave dielectric properties in Mg(ZrxTi1−x)O3 ceramics

“…4(a). The densities of MZ x T ceramics increased with the increase of the x content, moreover, it sharply increased from 3.81 to 4.53 g/cm 3 increased to 19 for x = 0.3. The existence of the TiO 2 second phase contributes to enhance the ε r (=100) [11], as shown by the XRD data.…”

“…A few studies were performed to improve Q × f of MgTiO 3 with the sintering aid Bi 2 O 3 -V 2 O 5 [3]. Some authors carried out analogous work with M 2+ ionic partial substitution in the A-site in MgTiO 3 .…”

Ultrafine Grinding of MgTiO3 Based Ceramic Influencing the Material Properties

“…In particular, the MgTiO 3 exhibit good microwave dielectrical properties of low dielectric constant (~17) and good quality factor (160000 GHz) [3]. The zero-resistance effect found between 50 and 60 K in the Mg Ti-O solid solution system is also an interesting factor [4].…”

“…The development of microwave dielectrics having high Q value in the high-frequency such as MgTiO 3 , is very important in the advancement of new media such as satellite communication and broadcasting system. MgTiO 3 has a technological potential for applications in filters, antennas for communication, radar, direct broadcasting satellite and global positioning system operating at microwave frequencies [7,8].…”

Microwave dielectric properties and its compatibility with silver electrode of Li2MgTi3O8 ceramics

“…Low-temperature sintering of dielectric materials with glass addition has been successfully * Corresponding author. [8][9][10][11][12][13][14][15].…”