Mechanical Properties of Hybrid PVA–Natural Curaua Fiber Composites

Abstract

This work presents the experimental study of hybrid cement-based composites with polyvinyl alcohol fiber (PVA) and alkali-treated, short, natural curaua fiber. The objective of this research is to develop composites reinforced with PVA and curaua fiber to present strain-hardening behavior with average crack width control. To achieve this objective, three groups of composites were investigated. The first group had only PVA fiber in volumes of 0.5, 1, and 2%. The composite with 2% PVA fiber was the only one with strain-hardening and crack width control. The second group had 0.5% PVA fiber and volume fractions of 2, 2.5, and 3% curaua fiber, and presented only deflection-hardening behavior. The third group had 1% PVA and volumes of 1, 1.5, and 2% curaua fiber, and presented strain-hardening behavior. Based on the results, the hybrid combination of 1% PVA and 1.5% curaua was the optimal mixture as it presented strain-hardening behavior and crack width control, with a lower volume of synthetic PVA fiber. Additionally, compressive strength and mix workability were calculated for the investigated composites for comparison.

Effect of sand types and mixing procedures on the flexural behaviour of the high ductile mortar in monotonic and cyclic loadings

“…The result was also far better than Zukowski et al’s result. They achieved average flexural strength of only 8.0 MPa with 2% PVA fibre [ 69 ]. Abbas et al achieved only 7.9 MPa [ 70 ].…”