Novel fabrication of fixed suspended silicon nitride structure for MEMS devices with dry etching

Abstract

A method of fabricating suspended LPCVD and PECVD silicon nitride structure is demonstrated for a wide range of MEMS (Micro-Electro-Mechanical Systems) applications. Low stress LPCVD and PECVD silicon nitride film of 1 μm thickness were selected for the structure separately. Optical Lithographic parameters, viz, photoresist (PR) thickness, PR variety and baking parameters were optimized to obtain the PR suitable for selective etching of silicon and silicon nitride. Parameters of the dry etching process were also optimized to achieve anisotropic etching of silicon nitride and isotropic etching of Si to release the silicon nitride beam. The silicon nitride structures, thus released, were characterized using Scanning Electron Microscope (SEM) and Laser Doppler Vibrometer (LDV). Finite Element Method (FEM) analysis was carried out using COMSOL, to compare with the experimental modes of vibration investigated using the Laser Doppler Vibrometer (LDV). Thus we demonstrate that the first mode at 30 kHz was indeed the optimum match.

A review of research on RF MEMS for metaverse interactions

“…Dry etching is one of the most commonly used techniques in the integrated circuit industry due to its high precision, high selectivity, high aspect ratio, and controllable sidewall angle for more precise control of critical dimensions. Subhani et al [114] used dry etching to prepare LPCVD and PECVD silicon nitride suspension structures, reducing the number of processing steps while avoiding problems such as sticking encountered with wet etching. The best low-pressure isotropic plasma etching formulation was developed and optimized.…”

Integrated opto‐mechanical cantilever sensor with a rib waveguide

“…The microcantilever has received increasing attention in the field of biological and chemical sensing due to a tiny sensor area, a label-less detection method, lowcost fabrication and mass production and compatibility with CMOS (complementary metal-oxide semiconductor) technology. [1][2][3][4][5][6][7] The microcantilever sensor is carried out by reading out the displacement of a cantilever under a stress generated on its surface. There are many types of readout methods.…”