Oil Droplet Coalescence in W/O/W Double Emulsions Examined in Models from Micrometer- to Millimeter-Sized Droplets

Abstract

Water-in-oil-in-water (W1/O/W2) double emulsions must resist W1–W1, O–O and W1–W2 coalescence to be suitable for applications. This work isolates the stability of the oil droplets in a double emulsion, focusing on the impact of the concentration of the hydrophilic surfactant. The stability against coalescence was measured on droplets ranging in size from millimeters to micrometers, evaluating three different measurement methods. The time between the contact and coalescence of millimeter-sized droplets at a planar interface was compared to the number of coalescence events in a microfluidic emulsion and to the change in the droplet size distributions of micrometer-sized single and double emulsions. For the examined formulations, the same stability trends were found in all three droplet sizes. When the concentration of the hydrophilic surfactant is reduced drastically, lipophilic surfactants can help to increase the oil droplets’ stability against coalescence. This article also provides recommendations as to which purpose each of the model experiments is suited and discusses advantages and limitations compared to previous research carried out directly on double emulsions.

Preparation of vitamin D3-loaded oil-in-water-in-oil double emulsions using psyllium gum: optimization using response surface methodology

“…Agric. (2022) 9:81 a high-water content, whereas the interaction of surfactants at interfaces is related to a double emulsion's stability [4]. However, these additives have low acceptable thresholds in the food industry.…”

Numerical assessment of ultrasound supported coalescence of water droplets in crude oil

“…The coalescence of the binary droplets could be utilized to predict the demulsification process with multiple or enlarged droplets. Descriptions of the scaling of the droplet coalescence could be found in the works of Boxall et al [59] , Hamedani [60] and Leister et al [41] .…”

The Effect of Gelatin Source on the Synthesis of Gelatin-Methacryloyl and the Production of Hydrogel Microparticles

“…For the formation of GelMA droplets, a microfluidic device with glass capillaries was employed, as shown in Figure 4B. A detailed description of the equipment is provided by Leister et al [53]. The setup consisted of one outer and two inner glass capillaries (World Precision Instruments, Friedberg, Germany).…”