Robotic hand design with linear actuators based on Toronto development

Abstract

In this work, the design of a robotic hand with 7 degrees of freedom is presented that allows greater flexibility, achieving the usual actions performed by a normal hand. The work consists of a prototype designed with linear actuators and myoelectric sensor, following the mechanism of the University of Toronto for the management of functional phalanges. The design, construction description, components and recommendations for the elaboration of a flexible and useful robotic hand for amputee patients with a residual limb for the socket are presented.
 Keywords: Robotic hand, Degree of freedom, Toronto´s Mechanism, lineal actuator.
 References
 [1]W. Diane, J. Braza and M. Yacub, Essentials of Physical Medicine and Rehabilitation, 4th ed. Philadelphia: Walter R. Frontera and Julie K. Silver and Thomas D. Rizzo, 2020, pp. 651 - 657.
 [2]A. Heerschop, C. Van Der Sluis, E. Otten, & R.M. Bongers, Looking beyond proportional control: The relevance of mode switching in learning to operate multi-articulating myoelectric upper-limb prostheses, . Biomedical Signal Processing and Control, 2020, doi:10.1016/j.bspc.2019.101647.
 [3]L. Heisnam, B. Suthar, 20 DOF robotic hand for tele-operation: — Design, simulation, control and accuracy test with leap motion. 2016 International Conference on Robotics and Automation for Humanitarian Applications (RAHA), 2016, doi:10.1109/raha.2016.7931886.
 [4]Y. Mishima, R. Ozawa, Design of a robotic finger using series gear chain mechanisms. 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2014, doi:10.1109/iros.2014.6942961.
 [5]N. Dechev, W. Cleghorn, S. Naumann, Multi-segmented finger design of an experimental prosthetic hand,Proceedings of the Sixth National Applied Mechanisms & Robotics Conference, december 1999.
 [6]O. Flor, “Building a mobile robot,” Education for the future. Accessed on: December 29, 2019. [Online] Available: https://omarflor2014.wixsite.com/misitio.
 [7]Vargas, O., Flor,O., Suarez, F., Design of a robotic prototype of the hand and right forearm for prostheses, Universidad, Ciencia y Tecnología, 2019.
 [8]O. Vargas, O. Flor, F. Suarez, C. Chimbo, Construction and functional tests of a robotic prototype for human prostheses, Revista espirales, 2020.
 [9]P. PonPriya, E. Priya, Design and control of prosthetic hand using myoelectric signal. International Conference on Computing and Communications Technologies (ICCCT), 2017, doi:10.1109/iccct2.2017.7972314.
 [10]N. Bajaj, A. Spiers, A. Dollar, State of the Art in Artificial Wrists: A Review of Prosthetic and Robotic Wrist Design. IEEE Transactions on Robotics, 2019, doi:10.1109/tro.2018.2865890.