Role of nanostructured polymers on the improvement of electrical response-based relative humidity sensors

Abstract

Nanostructured polymers, with different morphologies and different spatial organizations, have found, in last few years, a wide range of uses in humidity sensors, as a viable alternative to ceramic or semiconducting materials and to oxides (perovskite) compounds. Their enhanced sensitivity towards external stimuli has made them ideal candidates in the design of humidity sensors. This is mainly due to the fact that nanostructured polymers, when embedded with different content of water, represent a heterogeneous system whose dielectric and conductometric properties varies over a wide range, resulting in advantageous sensitive material in resistive-type or capacitive-type humidity sensors. The most notable property of nanostructured polymers is their inherent electrical behavior which is closely connected to the presence of heterogeneities at a nano- or micro-scale level. In the first part of this paper, we discuss and justify, on the basis of the dielectric theory of heterogeneous systems, how the dielectric properties of nanostructured polymers, independently of their chemical nature, could vary as a consequence of a different amount of water adsorption, meeting the basic requirement of any humidity sensor device. In particular, we have analyzed systems with different porosity and different pore interconnections to cover the most part of the structural arrangements and morphologies nanostructured polymers give rise. In the second part of the paper, we present some remarkable examples of nanostructured polymers employed in the fabrication of humidity sensors based on changes in the electrical properties (permittivity and electrical conductivity) upon exposure to moisture, highlighting the main features that make them suitable for sensors, with specific emphasis to characteristic parameters, such as sensitivity, response time, hysteresis and durability

The Effect of Eu Doping on Microstructure, Morphology and Methanal-Sensing Performance of Highly Ordered SnO2 Nanorods Array

“…However, several weaknesses, such as high working temperatures, poor selectivity, and limited maximum sensitivity are always lingering on it. Due to their excellent properties and novel applications in gas sensors, people have made great efforts to develop different nanostructured materials to improve the performances [6,7,8]. Especially, various novel nanostructures based on SnO 2 semiconducting oxides, such as nano films [9], hollow nanofibers [10], nanocomposites [11,12], porous architecture [13], and so on, have been extensively investigated as a promising candidate for gas sensing materials.…”

Room temperature vanadium dioxide–carbon nanotube gas sensors made via continuous hydrothermal flow synthesis

“…Wet air was produced by flowing a separate line of dry synthetic air though a Dreschel flask containing 0.5 L of deionized H2O as described previously 51 . Relative humidity (RH) is defined as the amount of water vapour in the atmosphere as a percentage of the amount of water vapour the atmosphere could hold at a specific temperature 52 (23̊ C in the current study). For the water vapour sensitivity testing, the relative humidity of the chamber was increased by mixing the required ratio of dry synthetic air with wet air using the mass flow controllers for 600 s (in 10 % steps from 0 to 90 % RH, ±5 % RH), followed by 1200 s of dry synthetic air to re-establish the baseline resistance of the sensors.…”

Low Humidity Characteristics of Polymer-Based Capacitive Humidity Sensors

“…Generally, g can be a function of water molecules' uptake. Another feature is that water in confined systems behaves differently from bulk liquid water; the relative permittivity depends on the average size of volume where water is confined [25,26].…”