Thermomechanical, water absorption, ultraviolet resistance and laser‐assisted electroless plating behavior of Cu₂O and melamine–formaldehyde‐coated sisal fiber‐modified poly(lactic acid) composites

Abstract

Poly(lactic acid) (PLA)/Cu2O composites and melamine–formaldehyde‐coated sisal fibers (MF‐sisal fibers) modified PLA/Cu2O hybrid composites were prepared. The effect of Cu2O and MF‐sisal fibers on the tensile properties, fracture morphology, crystallinity, thermal and electrical conductivity, thermal stability, water absorption, UV resistance, and laser‐assisted metallization by electroless plating were systematically studied. The addition of MF‐sisal fibers recompensed the tensile properties (strength and elongation at break [EB]) and thermal stability of the PLA/Cu2O composites. The crystallinity, thermal conductivity, and electrical conductivity of the PLA matrix marginally increased in the presence of Cu2O and MF‐sisal fibers. The water absorption was reduced for the PLA/Cu2O composites but increased for the MF‐sisal fibers modified PLA/Cu2O hybrid composites due to the presence of free hydroxyl groups present in the MF‐sisal fibers. The presence of Cu2O obstructed the UV transmission through the PLA composites and hybrid composites, clearly showing the UV shielding efficiency of the Cu2O particles. The samples were irradiated with fiber pulse laser for metallization by electroless plating. The SEM micrographs of the irradiated samples revealed an increase in surface roughness with increasing fluence. Further, Talysurf series 2 was used to quantify the roughness of the irradiated composites. Finally, the laser treated samples were selectively metallized by electroless plating. POLYM. COMPOS., 40:3264–3274, 2019. © 2019 Society of Plastics Engineers

Investigation of the Effect of the Skull in Transcranial Photoacoustic Imaging: A Preliminary Ex Vivo Study

“…Therefore, we utilized a solid imaging target instead of the actual blood vasculature. According to the literature, the absorbance of polyactic material (with a normalized absorbance ~25% [ 69 ]) at the imaging wavelength of 690 nm is close to the absorbance of blood (with the normalized absorbance of ~20% [ 70 ]).…”

Investigation of thermo‐mechanical and viscoelastic properties of 3D‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites

“…Additionally, PLA offers excellent chemical and physical properties, making it a viable alternative to conventional oil-based polymers in numerous common applications. 3,4 As widely known, reinforcing polymer matrices is one of the best approaches to enhance their mechanical and structural properties. 5,6 To support the bio-based concept, natural fibers have been selected as reinforcements, mainly due to their unique characteristics including low density, widespread availability, quite good mechanical properties, high thermal and acoustic insulation, biodegradability, and ease of processing.…”

“…Its eco‐friendly source makes it a favorable choice for various applications. Additionally, PLA offers excellent chemical and physical properties, making it a viable alternative to conventional oil‐based polymers in numerous common applications 3,4 …”