Two-step surface treatment of 3D braided carbon/Kevlar hybrid fabric and influence on mechanical performance of its composites

Wan, Yizao; Lian, Jijian; Huang, Yuan; Wang, Y.L.; Chen, G.C.

doi:10.1016/j.msea.2006.05.084

Cited by 38 publications

(9 citation statements)

References 26 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Among the polymeric materials reinforced with fibers, stand out the hybrid polymer composites that offer advantages in the combination of fibers used as reinforcement, producing a material with higher specific properties 1,[4][5][6] , which would be difficult to obtain using a single type of fibers reinforcement.…”

Section: Introductionmentioning

confidence: 99%

Polymer Composites Reinforced with Hybrid Fiber Fabrics

Felipe

Batista

et al. 2017

Mat. Res.

View full text Add to dashboard Cite

In an effort to show the influence of the hybridization method in hybrid fabric reinforced composites within the characteristic of the fracture and the mechanical properties, two laminate reinforced with bi-directional woven were developed, where one of them was reinforced with a hybrid strand (hybrid strand composite laminate) and the other with a different strands (hybrid fabric composite laminate). Both laminates used polyester resin, Kevlar-49 and glass-E fibers, had four layers and were prepared industrially by hand lay-up manufacturing. The percentages by weight of fiberglass and Kevlar in each type of woven are equal. The hybrid strand composite laminate showed a higher tensile strength, however the hybrid fabric composite laminate showed superior properties in three-point bending test, for example, 41.7 % superiority in flexural strength. The results showed that the hybridization method in hybrid reinforced composites influences the mechanical behavior of laminates and the formation and spread of damage.

show abstract

Section: Introductionmentioning

confidence: 99%

Polymer Composites Reinforced with Hybrid Fiber Fabrics

Felipe

Batista

et al. 2017

Mat. Res.

View full text Add to dashboard Cite

show abstract

“…. To improve fiber–matrix adhesion, a solution oxidation process was employed for braided hybrid fabrics according to previous studies . Typically, braided hybrid fabrics were immersed in 5% (NH 4 ) 2 HPO 4 solution initially and boiled for an hour, then rinsed several times with deionized water, and dried at 80°C for 10 h finally.…”

Section: Methodsmentioning

confidence: 99%

Tribological behavior of three‐dimensional braided carbon fiber reinforced polyetheretherketone composites

Qiu

et al. 2014

Polymer Composites

View full text Add to dashboard Cite

Three-dimensional (3D) braided carbon fiber reinforced polyetheretherketone (denoted as CF 3D /PEEK) composites with various fiber volume fractions were prepared via hybrid woven plus vacuum heat-pressing technology and their tribological behaviors against steel counterpart with different normal loads at dry sliding were investigated. Contrast tribological tests with different lubricants (deionized water and sea water) and counterparts made from different materials (epoxy resin, PEEK) were also conducted. The results showed that the incorporation of 3D braided carbon fiber can greatly improve the tribological properties of PEEK over a certain range of carbon fiber volume fraction (V f ) and an optimum fiber loading of 54% exists. The friction coefficient of the CF 3D

show abstract

“…2 In the recent past, utilizing some fibers such as carbon, glass, Kevlar, and basalt have been increased excessively as reinforcement in the PMC due to their high mechanical properties. 3–5 To achieve specific properties such as optimized thermal properties, resistance in the elevated temperatures, and compatibility with the different environments, many kinds of research have been carried out to create suitable conditions for using other fibers in composite industries. 6,7 Therefore, providing new features in polymer composites is a driving force to introduce new materials with combined properties such as hybrid composites.…”

Section: Introductionmentioning

confidence: 99%

Effect of interlayer hybridization of carbon, Kevlar, and glass fibers with oxidized polyacrylonitrile fibers on the mechanical behaviors of hybrid composites

Ebrahimnezhad‐Khaljiri

Eslami‐Farsani

Akbarzadeh

2019

Proceedings of the Institution of Mechanical Engineers, Part C:

View full text Add to dashboard Cite

This study focuses on tensile and flexural behaviors of epoxy composites, which have been reinforced by oxidized polyacrylonitrile fibers and high-performance fibers (carbon, glass, and Kevlar). In hybrid composites, the parameters of hybridization show positive or negative hybrid effects on its mechanical properties. The results of energy absorption achieved from the tensile test depicted that reinforced hybrid composites by two plies of oxidized polyacrylonitrile fiber and two plies of carbon, Kevlar, and glass fibers with energy absorption of 916, 700, and 899 kJ m–3 had the maximum hybridization parameter, which were 1.1, 0.64, and 1.54, respectively. Also, the mentioned hybrid composites with flexural stresses of 279.4, 198.5, and 167.3 MPa had the maximum hybridization parameter in a flexural test, which were 3.01, 2.68, and 1.80, respectively. Hybrid composites, which were reinforced by three plies of oxidized polyacrylonitrile fiber/one ply carbon fibers, three plies of oxidized polyacrylonitrile fiber/one ply of glass fibers, and two plies of oxidized polyacrylonitrile fiber/two plies of Kevlar fibers, had the maximum pseudo strain in their group, which were 0.12%, 0.65%, and 0.17%, respectively. The microstructure investigations depicted crossing cracks among oxidized polyacrylonitrile fiber and cutting the oxidized polyacrylonitrile fiber, which were caused to increase the hybridization parameters in mechanical tests. Also, it was found that as compared with carbon, glass, and Kevlar fibers, oxidized polyacrylonitrile fiber had a ductile fracture, which was the reason for the pseudo-ductility behavior in hybrid composites.

show abstract

Two-step surface treatment of 3D braided carbon/Kevlar hybrid fabric and influence on mechanical performance of its composites

Cited by 38 publications

References 26 publications

Polymer Composites Reinforced with Hybrid Fiber Fabrics

Polymer Composites Reinforced with Hybrid Fiber Fabrics

Tribological behavior of three‐dimensional braided carbon fiber reinforced polyetheretherketone composites

Effect of interlayer hybridization of carbon, Kevlar, and glass fibers with oxidized polyacrylonitrile fibers on the mechanical behaviors of hybrid composites

Contact Info

Product

Resources

About