Verification Measurement of Laboratory Test Equipment for Evaluation of Technical Properties of Automotive Oil Filters

Abstract

By simulating the operating conditions, it is possible to verify and evaluate the technical properties of motor vehicle oil filters and the functionality of the designed equipment. Contaminated engine oil from operation was used with MANN W950/26 oil filter and a CNH Industrial 2992242 oil filter in the test circuit. Before use, the level of engine oil contamination in the test circuit was determined by evaluating the physicochemical properties. The laboratory test equipment also allows monitoring the technical life of oil filters, with variously contaminated engine oil, with the possibility of extending engine oil change service intervals depending on changes in the physicochemical properties of engine oil and filter efficiency. These laboratory tests can be performed in parallel in two hydraulic circuits, which can significantly reduce the testing time of the filter capabilities of oil filters, without the risk of engine damage, provided that the tests were performed under operating conditions. The results of the evaluation of the filtration capacity of oil filters can be used in the design of new filter materials, but also with a suitably determined methodology of oil filter replacement and engine oil change interval, it is possible to extend replacement intervals, which has a significant benefit not only from an economic but also ecological point of view. The result of the measurements is the confirmation of the functionality of the device with the possibility of simulating the operating conditions, at different degrees of oil contamination, at different operating temperatures and using different oil filters.